Hoist pad project. The adventures of RWS continue!!!!!!!

[Runs With Scissors]

First off, I apologize to any Machinist, Weldor, or seasoned Fabricator. What you are about to see is simply “what I know” and I mean no disrespect and do not claim to be a “tradesmen”.

I’m just a guy that likes tools and metal working; I am in no position to “give advice”, just having fun.

Carry on!!!

So there I am, wanting to use my hoist to lift my tractor to work on it.

After some “looking around” I find an idea that intrigues me.

I wish I could remember where it was from, and who came up with the idea, but I can’t.

Anyway, its basically “large footprint hoist pads”, so you can drive up on them, secure the front tires, and safely lift my tractor.

The first one I made, was “Pre-Langmuir” so I drilled everything “old school”

However the next 3 were cut using my Crossfire Pro!!!

Wow, that is a game changer for sure!!!

Here I am cutting out the “plates”…Took about 45 seconds per plate, after I got them “aligned”

IMG_01061920×2560 338 KB


from a different thread, I had to use “witness marks” to try and get each plate cut “about the same”




IMG_01091920×2560 161 KB


Then it was off to the lathe to turn down the ends of the parts that will go into the hoist and eventually be welded to the above “plates”.




IMG_26681920×1080 368 KB


First I “face it”




Lock tool making 11920×1080 227 KB


Now I turn down one end to go in the “hoist eye”




turning 11920×1080 400 KB


I haven’t learned how to use the cross slide to actually measure how far I have cut, so I just have to “creep up” on it, and keep checking it.




turning 21920×1080 352 KB


Not a great finish, so I “cheat” and get some “emery cloth” to clean it up a bit.




turning31920×1080 240 KB


Now I flip it and turn the “plate side”, but my battery died, so here is the end result of the “turned pieces”




IMG_01171920×2560 364 KB


I since they are so big, I decide to “pre heat” them so I put them in the oven at 500 degrees for about 1.5’ish hours.




IMG_01191920×2560 320 KB


Here is the first pass…My “welding positioner” crapped out on me, so I had to go “old school” and had to keep stopping to turn the piece.

1st pass




IMG_01201920×2560 306 KB


2nd pass. For some reason my subsequent passes, never look as good as my first…




IMG_01271920×2560 321 KB


3rd pass




IMG_01341920×2560 331 KB

 

[Runs With Scissors]

Now I weld the “topside”




IMG_0115 21920×2560 310 KB





IMG_01371920×2560 371 KB


For those unfamiliar here is a pic of the hoist arm ready for my truck.




IMG_01391920×2560 451 KB


here is it when that “hoist pad” is removed.




IMG_01401920×1440 257 KB


Now for the “Tractor pads”…but first here is a pic of what happens when you let your grandkids play in the garage…




IMG_01411920×2560 390 KB

IMG_01411920×2560 390 KB





IMG_01431920×2560 419 KB





IMG_01441920×2560 334 KB





IMG_01451920×2560 376 KB

 

[Yooper]

I’m suffering from hoist envy! Starting to get cnc plasma envy!

Here is a sample of what you can use to measure your cut distance with accuracy. I prefer the magnetic style. You can find these in any machining supply catalogs or on eBay, Amazon etc

 

[Oleracer]

Great timing. Actually thought about this couple days ago.

 

[woodman55]

I like it a lot. I am guessing you are also making some removable ramps so the tractor can drive up on them without flexing the plates.

 

[Runs With Scissors]

I like it a lot. I am guessing you are also making some removable ramps so the tractor can drive up on them without flexing the plates.

Yes sir ; Ramps are in the future. As soon as my shoulder heals a bit more, I'm gonna go pick it up, so I can have it here to "measure" .

 

[Runs With Scissors]

I’m suffering from hoist envy! Starting to get cnc plasma envy!

Here is a sample of what you can use to measure your cut distance with accuracy. I prefer the magnetic style. You can find these in any machining supply catalogs or on eBay, Amazon etc

View attachment 134901

Be careful.......those are "envys/symptoms" are dangerous......

Also thanks for posting that.....I will have to look for one of those for my Craftsman bed.

 

[MOOTS]

I see your lift has lock pins, so the arms won’t swivel while they are raised. Hopefully they work.

How will you secure tire on that pad?

 

[Runs With Scissors]

I see your lift has lock pins, so the arms won’t swivel while they are raised. Hopefully they work.

How will you secure tire on that pad?

Each pad has 4 holes, so I plan on using a "ratcheting tire hold down" (on the fronts at least.)

 

[Ktrim]

So let me see if I'm reading these posts correctly.
You have a wife that lets you put a plasma cutter in the basement and steel parts in her oven.
One more thing to be jealous of.

 

[Runs With Scissors]

So let me see if I'm reading these posts correctly.
You have a wife that lets you put a plasma cutter in the basement and steel parts in her oven.
One more thing to be jealous of.

Well, I suppose that depends on what the definition of the word "lets" is?

 

[Ktrim]

Well, I suppose that depends on what the definition of the word "lets" is?