Help with rear remotes

[jrwhitey2000]

Think I have settled on a MX4800DT tractor. I am ordering it with the front loader. I am also going to buy the backhoe subframe kit for purchase of a backhoe later. I am trying to decide what rear remote style valves to add to the tractor so that when I do get a backhoe I will be able to power it. The top and tilt feature maybe something I would add on later so having hydraulics for that would be great as well. About the only other thing I would use rear remotes for would be a hydraulic blade later down the line. Any help is appreciated


Sent from my iPhone using Tapatalk

 

[MtnViewRanch]

Well, you want the detent valve to feed the back hoe, but detent valves are really only good for feeding implements that require a constant flow. While you can use them to control a cylinder, sort of a pain with the control not being a spring return to center valve.

The other 2 should have the float feature IMO if you are considering a top & tilt set.

If it were me, I would get the spring return to center valve for the first valve and figure out something to hold it open for your hoe. That way it is a good valve to use for an implement cylinder.

 

[jrwhitey2000]

Here are all the options to select from.


Sent from my iPhone using Tapatalk