help please

[mister bill]

I have just got a B6000E tractor it has no stickers left to tell me which lever does what. I also need to know what steps to take if I cannot get the transmission into neutral? I have tried all the positions on the shifters and found that if I put the transmittion in reverse the front wheels try to go forward while the back ones try to go in reverse???
Broken???

 

[ipz2222]

I assume this is a gear transmssion??, Probably a problam with the shift forks. Don't have any info on the stickers.

 

[cmorningstar01]

if I put the transmittion in reverse the front wheels try to go forward while the back ones try to go in reverse???

Sounds like someone may have switched the front differential with one from a machine that the engine rotates in a different direction or something is really messed up inside the transmission.

 

[300zx]

Isn't a B6000E supposed to be a 2WD?

 

[Kytim]

Yes it is, an "E" model is a 2wd. a DT again is the 4x4.

 

[mister bill]

well after a little exploratory surgury I found the reverse gear runs on the 4x4 shaft in the transmition. Which was siezed. I found that the 2 shifters on the left side of the trans housing are for pto control the front on I think is for different speeds the back is to switch from ground drive on the pto to motor drive. the right side 2 are high and low range and 2 - 4 wheel drive. Lots of levers for a machind no bigger that a quad. As for pictures I will try.

he he go to me come from u

Bill

 

[284 International]

If the tractor is in a forward gear, do the front tires go backwards?