I am an Aussie and I really need some help to identify the model of this 3 cylinder Kubota diesel. Despite a thorough search I cannot find an engine number. There is a partial 7555 on the head cover, but other numbers on the block mean nothing to me.. The motor was originally fitted to a Toro mower but sadly I do not even know the Toro model number. I am hoping that the attached photos might help some-one with more knowledge of Kubota engines than I presently have.
Help on engine identification.
- Thread starter Grizzdbear67
- Start date
In your third picture you can see the injector lines coming out of the injection pump. Right where the injection pump bolts to the block there are some numbers in the block. Those numbers are what you are looking for. Probably have to do some cleaning to get a good read. They usually start back by the round valve you can see.
Might use a emery paper then a soap stick to fill the numbers in.
Might use a emery paper then a soap stick to fill the numbers in.
All the numbers you've shown are casting numbers. there should be a flat spot on the block above the injector pump that will give the model number and the serial number stamped into the casting.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Also on the side of the block, Injection pump side, to the rear of the engine will be the engine size cast into the block, It will be a CC #.
FYI: If your asking if this motor will fit in you B7100, sadly probably not, look at the oil filter location.
FYI: If your asking if this motor will fit in you B7100, sadly probably not, look at the oil filter location.
Attachments
Last edited:
Thanks for the reply. Appears I have been conned and it is NOT a Kubota diesel but a Mitsubishi engine likely only 13 HP. The Number is L3A 0 696.