I bought a used blower for my BX24. I thought it came with everything but looks like I am missing a couple of items. I bought the longer shaft and installed on the tractor but missing a couple items..
1) the short shaft from the back of the blower to the front of the quick hitch
2) a bracket to hold hitch hoses to the frame
3) a bracket to hold the shoot rotation shaft to the tractor
Any idea what these are called or what the PNs are?
I didn***8217;t think of these items when I bought the blower!
Any help is appreciated
Check the parts finder on the Kubota web site. Parts/manual may vary by the serial number of the blower. I assume this is a BX2750D blower model? (not the HD model)
1) There are two parts for the quick hitch drive shaft, a male portion that is part of the quick hitch, and the female driveshaft attached to the blower (comes with blower). Quick hitch part name is BX2751. There are about 4 different versions of the quick hitch. Most of them list part # 7006003113 as the male shaft part but newer serials (S.NO.2510666 AND UP) show part # 7006002182
2) Most BX24 have a hose "ring" up near the front right of the frame to pass hoses through. Check the parts manual (or tractor manual) for that part number. Not sure if that is part of the quick hitch or not (I don't have that ring on my BX25 either). Just checked, the hose ring is part of the quick hitch kit... Part# seems to be 7006001609 but you need a M10-1.25x35mm Gr 8.8 metric bolt and a 7/16 flat washer for most of those hitch models.
3) For the BX24, the support for the manual turning shaft is a small right angle bracket/bushing mounted (clamped) onto the main hydraulic handle shaft, near the bottom. It simply has a hole to pass the handle through. You may be able to fabricate one from some angle iron or aluminum angle bar.
