Hazard Lights 1982 B7100 HST

[Jimc3165]

I have been looking for the rear hazard lights for my new to me tractor. Went to my Kubota dealer they finally located the replacement light to the tune of 84.00 each. I told the parts guy thanks I'd keep looking. I've emailed several salvage places with no response. These things are getting hard to find so I kept looking and found some on Ebay but could not get the seller to respond with the size. Finally tracked down the manufacturer and volia they are 65MM which works out to about 2.5 inches so I bought 2 and am hoping they look original. I measured the ring on mine and it was 2 1/8 so it will be real close to the same. If anyone wants to try these the part# is S.71975
Rear Lamp - Amber
(Bulb Included)
Replaces: 34260-34200,
34260-34201,
34260-34202,
Fits: L185, L235,
L245, L1501, L1801,
L2200, L2201

I just ordered 2 from Madison Tractor in North Carolina for 19.00 plus 11.00 shipping.

 

[Lil Foot]

Looking forward to seeing the pics.

 

[Jimc3165]

As soon as they come in will post pics.

 

[DaveB6200]

I was thinking about these at one point but just never got them. Probably no where near close to stock looking but thought they looked pretty nice for $7.00

http://www.surpluscenter.com/Electr...DC-AMBER-STUD-MOUNT-LIGHT-313-AA-12-998-D.axd

 

[Jimc3165]

I was trying to keep the stock appearance but the stock (OE) lights were very hard to find the ones I posted above are just a 1/4 in larger in diameter.

 

[Jimc3165]

Ok got the new lights in the first pics was of the old light on the right and the new light on the left for comparison and the second was after install and testing them. I had to drill out the hole to 3/8's but other than that pretty much a bolt on replacement.

 

[Lil Foot]

Looks great! Mine were bigger, and are partially blocked by the ROPS when viewed from the rear, but with the LEDs, they're very bright & don't pull much current.
http://www.orangetractortalks.com/forums/showthread.php?t=19839&highlight=rear+lights