Well, after a winter of sheet ice and the issue associated with tearing into that hard surface I decided to make a ripper using a heavy steel grating that I previously used to rake my gravel drive.
I ran the unit with great success doing the ice and now the weather has warmed I managed to get some paint onto the unit and thought it colourful enough for its big day on the forum.
I can regulate the down pressure via the top link and now with gravel, I can easily dig into that surface 2 inches or more.
Another item for the just in case department.
I ran the unit with great success doing the ice and now the weather has warmed I managed to get some paint onto the unit and thought it colourful enough for its big day on the forum.
I can regulate the down pressure via the top link and now with gravel, I can easily dig into that surface 2 inches or more.
Another item for the just in case department.
