What size grapple would be best for a B2650 and what's an average price for one, by the sounds of everyone on here it's one of the things I should have, so I might as well get it when I purchase the tractor.
Grapple for a B2650
- Thread starter mkcj
- Start date
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
For a B you want the lightest and smallest you can get.
You will also need to get the third function kit to run it.
You will also need to get the third function kit to run it.
Look at LandPride. If you are buying your B2650 new and using Kubota credit, you will be able to finance it with your tractor.
I believe there is one for the BX models, and then a larger one for the B series tractors.
I believe there is one for the BX models, and then a larger one for the B series tractors.
I have the land pride SG60 on my B2650. Paid $2500 out the door including all the valve and new controller work. I love it so much. I cannot wait till the ground dries up so I can avoid getting stuck in the mud.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
I have a B2650 TLB with loaded tires on order. I liked the idea of having 2 clamps on the grapple so I ordered the 54" EA Wicked Root Grapple. It weighs 349 pounds which is only 50-100 pounds more than the lightest grapples I could find. For the awesome design and stength the Wicked Grapple has, it's a tradeoff I was OK with. And, it was $1990 with free shipping.
Fingers crossed...
Fingers crossed...
Last edited:
Artillian Tractor is now making his modular pallet fork / grapple frame for SSQA.
The Frame weights about 95#.
The Grapple module is about 90#
The grapple beds are 40# each.
Frame and grapple only you are at less than 200#. Add two beds and you are at about 260#.
http://www.artillian.com/Grapple.htm
I currently have the frame and forks. As soon as the toy fund allows I am adding the Landpride diverter kit and then the grapple.
The Frame weights about 95#.
The Grapple module is about 90#
The grapple beds are 40# each.
Frame and grapple only you are at less than 200#. Add two beds and you are at about 260#.
http://www.artillian.com/Grapple.htm
I currently have the frame and forks. As soon as the toy fund allows I am adding the Landpride diverter kit and then the grapple.
bcuster
Member
Equipment
B2650 w/ cab, FEL, BH, 63" snowblower w/ extensions, grapple, forks, box blade
I have the 54" EA Wicked Root Grapple on my B2650, and can tell you it's very well built, and I have no doubt overloaded it without any damage. You won't go wrong, and save some money when compared to the others.