Grand L Rear Remote Handle Cover Replacements

[DB-n-VA]

My tractor is two years old and have noticed that my rear remote handles are splitting apart and loose. Does anybody have a solution for this or a replacement option that last longer then two years?

 

[TheOldHokie]

Pretty generic item - lots of sizes to chose from. This is $3 at Grainger

DAVIES Hand Knob: Tapered, Thermoset, 5/16"-18, 30 mm Thread Lg, 0.875 in Dia
Item 6CYR6
Mfr. Model 0692CU

• 
• 

 

[kubotafreak]

Had really good luck with liquid plasti dip. I have a cab so mine are inside, but if I had this issue I would just replace with a new oem and then dip it 3 times.

61023-41630

 

[CGMKCM]

I used electrical heat shrink tubing that had interior glue. It has held up well for six months so far.

 

[DB-n-VA]

I have decided to order the OEM replacement for the time but I am very interested in the Davies Hand Knobs. They appear to be a good product and after checking their website, there is no information on what the handles can tolerate. I called the number to Davies Molding and ask the customer rep. how good are these handles to UV exposure or chemical exposure and she gave me a email address to send me questions to so one of the their tech's could respond. I will respond to this once I receive answers for those who have the same problem looking for a solution.

 

[mikester]

Park your tractor indoors and out of the sunshine and elements it will last longer

 

[SDT]

My tractor is two years old and have noticed that my rear remote handles are splitting apart and loose. Does anybody have a solution for this or a replacement option that last longer then two years?

Happened to all three of mine shortly after delivery.

Kubota replacements lasted less than two years.

Tractor is never outside unless being used.

 

[DB-n-VA]

I have decided to order the OEM replacement for the time but I am very interested in the Davies Hand Knobs. They appear to be a good product and after checking their website, there is no information on what the handles can tolerate. I called the number to Davies Molding and ask the customer rep. how good are these handles to UV exposure or chemical exposure and she gave me a email address to send me questions to so one of the their tech's could respond. I will respond to this once I receive answers for those who have the same problem looking for a solution.

So, Davies has chosen to not respond to me or extremely backed up on the questions I have ask them about their product. So, some searching on the inner screen has has answered most of my questions, which is why they may have chosen not to answer, who knowns. Most Thermoset polymers are UV resistant and stand up to harsh chemicals. They also retain their color for a long period of time. With this done and somewhat satisfied with the answer from others and not the company that makes them, I will spend the money to get them and time to thread the rear remote levers to accept the handles.
@TheOldHokie - Thank You for your suggestion.