Grand L 60 cab tractor owners - need a quick favor

[troverman]

Hi folks,

Could someone pull the metal screen that protects the AC condenser and just give me a quick measurement of width x length of the screen? This is the first screen that pulls straight up to remove, not the larger one for the radiator that slides out sideways.

I now have an MX6000 cab tractor with a poor condenser screen design, and I'm trying to see if the Grand L 60 screen is about the same size (which I think it is).

Thanks in advance!

 

[woodman55]

On my L6060 hstc it is 14 1/2 inches high, plus 3/4 for a tab, and 12 1/8 wide. It is finer than the rad screen.

 

[troverman]

Thanks so much woodman55. That is super helpful.

 

[troverman]

I finally measured my MX condenser. It is the same height but seems to be more than an inch wider.

 

[woodman55]

When you build the mount, can you close the sides in a bit ?

 

[troverman]

When you build the mount, can you close the sides in a bit ?

I'm still thinking of the magnets route. As it is right now, the flimsy floppy screen leaves quite a bit exposed on both sides anyway. At least the Grand L screen is rigid enough to remain tight up to the condenser.