Grab hook with 1" pin?

T

trackman23

Member

Equipment
MX4800
Nov 22, 2023
86
16
8
NC
I'm having trouble finding a grab hook for my MX4800 draw bar with a 1" pin. I have one with a 3/4" pin but it is driving me nuts being installed in a 1" hole.

Anyone here know where I can find a grab hook for the 1" hole?

Thanks!
 
GeoHorn

GeoHorn

Well-known member
Lifetime Member

Equipment
M4700DT, LA1002FEL, Ferguson5-8B Compactor-Roller, 10KDumpTrailer, RTV-X900
May 18, 2018
6,054
3,326
113
Texas
The replacement hydraulic cylinder I installed on my roller came from Magister which had a 7/8” pin on each end…. but also included bushings for 1”…to be placed on the pins…. Thankfully, because that’s what my roller needed.

Do you have a hack-saw..?


OR

 
Last edited:
G

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,713
5,066
113
Greensville,Ontario,Canada
yeesh I searched high and low(well Google did..) for a 1" clevis grab hook.... ZERO hits....

I'm thinking once you get that big, riggers use oyther ,safer means of,well, umm, rigging.....

short term bodge, use a bushing/adapter/sleeve..3/4" ID, 1" OD
 
You must log in or register to reply here.

Top Bottom