jdm4899
New member
Equipment
Grand L 3560, loader, grapple, box blade, straight blade, rotary cutter
Last weekend while mowing heavy growth pasture fields I lost over half of the chain link discharge shield on my RC2072 cutter
The rod holding the links in the mounting plate has been re-bent on the ends several times due to being pulled out straight from catching on vegetation.
Last weekend it was straightened out and pulled over half way out.
The Kabota Dealer says they have never heard of this issue and are hesitant to warrant the replacement of the rod and links. Total cost to replace is approximately $70.00.
Has anyone else experienced this problem with that type of shield?
The rod holding the links in the mounting plate has been re-bent on the ends several times due to being pulled out straight from catching on vegetation.
Last weekend it was straightened out and pulled over half way out.
The Kabota Dealer says they have never heard of this issue and are hesitant to warrant the replacement of the rod and links. Total cost to replace is approximately $70.00.
Has anyone else experienced this problem with that type of shield?
