G3200 Crown and Pinion help

[tractorfixr]

Im new to the chat. Im looking for a crown and pinion set for a G3200 garden tractor. There is no part number in the Kubota system, wondering if anyone can help me. The reason for the failure is the owner ( not Me ) decided to mount a 500 lb block as a counterweight when using the loader

 

[dlundblad]

Did you try Messicks? Do a search under differential. You need an account to view diagrams.

Not really following what the tractor is.. It has a loader?

 

[North Idaho Wolfman]

I can't tell you if the parts are actually available.
And you will need to verify fitment per serial number.

But in this case your better of if available to replace the whole assembly, which includes the ring and pinion.

P/N 66021-81492 @ ~$299.36

Ring and pinion set is:

P/N 66021-81472 @ ~$545.17

 

[dlundblad]

At those prices, one might be better off looking for a used rear end, but keep in mind the G3200 is gear drive so HST parts may not be compatible.

 

[BruceP]

I own G4200 HST so have some knowledge with this line of garden tractors. I find it difficult to believe that anyone could 'break' the rear-end on one of these things. The thing is built like a tank. for a garden-tractor, the rear-end is WAYYYY overbuilt. (the chincy steering-gear is another thing)

The G3200 was available in BOTH 'geared' and HST versions.... the OP did not say which his tractor is.

In any case, there are often complete used rear-ends for our tractors available on eBay. I would expect the cost would be reasonable... but shipping may be an issue unless you could find one within driving-distance.

 

[SidecarFlip]

When you run anything that requires lubricating fluid dry, it's going to fail sooner or later, probably sooner.