fuel additives yes or no ?

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
Help appreciated, I just bought a Kubota 2013, model B3200, Its kept in heated garage. I have neighbors say due to diesel fuel today, I should put in additives in fuel tank, for different reason, such as lubrication and other reason. The dealer tells me todays engines are designed to run on the fuel on the market today. He points out of if gelling in fuel due to low temps is not a problem do not put in additives. Advice from everyone appreciated.
 

GWD

Member

Equipment
M7040, L48 TLB, BX2200
Jan 8, 2010
792
15
18
Northern California
My advice is to do a search on this site and other tractor forums. More information than can be digested on the topic.

No reason to reinvent the wheel.
 

bearbait

Well-known member
Lifetime Member

Equipment
L3560, 64" snowblower, 72" back blade
Dec 9, 2011
4,058
834
113
New Glasgow Canada
I was wondering the same thing so I asked the dealer where I bought the tractor. They told me that Kubota doesn't recommend using any additive.
 

BAP

Well-known member
Lifetime Member

Equipment
2012 Kubota 2920, 60MMM, FEL, BH65 48" Bush Hog, 60"Backblade, B2782B Snowblower
Dec 31, 2012
2,758
873
113
New Hampshire
You might want to consider a diesel additive for water and algae control. Keeping it in a heated garage and taking it out in the cold and back again, can lead to condensation in the tank. That will lead to water that could freeze and contribute to algae growth. A little bit of additive can prevent problems down the road.
 

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,520
2,556
113
Peoria, AZ
Mine is stored in an un-heated garage, (-7 a week ago) so I use Power Service to prevent gelling when the temperature dictates…. other than that, no additives.
 

hodge

Well-known member
Lifetime Member

Equipment
John Deere 790 John Deere 310 backhoe Bobcat 743
Nov 19, 2010
2,903
450
83
Love, VA
No offense to anyone, but I wouldn't trust the dealership- they aren't always as versed as they should be. Read your owners manual, and do what it says. That is straight from the horse's mouth.
I use Powerservice in my truck, two tractors, and skid steer. I have dealt with gelling, and prefer not to, again. I have also dealt with bacterial fungus, also no fun. Kubota can't design a fuel delivery system that keeps gelling and fungus from happening. That is controlled by the fuel itself.
 

bees1st

New member

Equipment
'77 b6000 4x4 grader and loader
Jul 5, 2013
6
0
0
hope,me usa
I was wondering the same thing so I asked the dealer where I bought the tractor. They told me that Kubota doesn't recommend using any additive.
This is interesting . Because my local Kubota dealer sells one that says Kubota on it .
 

hodge

Well-known member
Lifetime Member

Equipment
John Deere 790 John Deere 310 backhoe Bobcat 743
Nov 19, 2010
2,903
450
83
Love, VA
This is interesting . Because my local Kubota dealer sells one that says Kubota on it .
See? The arm doesn't always know what the brain is doing.
 

skeets

Well-known member

Equipment
BX 2360 /B2601
Oct 2, 2009
14,565
3,324
113
SW Pa
I use power service and ever once in a while I toss in some sea foam,, just cause I have it ,,,, I have a Bud that puts in a couple oz of MMO every time he fills up,, does it help, does it hurt,, I duno
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,159
5,262
113
Chenango County, NY
I've used Power Service (white bottle) since I bought the tractor in April.

After my run-ins with ethanol gasoline over the last couple years, I'm more apt to use an additive.

My old (22 years) Stihl FS-86 trimmer was killed by ethanol. After tearing carb down, used Seafoam. Ran for a month, then quit. Bought a new FS-130 4-cycle trimmer to replace it.

Tore old FS-86 apart again, and started using Startron. The ol' fart has a heavy brush blade on it now, and it runs damn good. I like it better than the new one.

While the ethanol p***ed me off - at least it didn't get my 046 Magnum...yet. Startron and Stabil go in all gas now.

Its one thing for a $400 trimmer - a $1,100 chainsaw is a different story. I use the same theory for a $15,000 tractor. As someone said; it's the fuel, not the machine its in.

Ok - I'm better now.

Just my $0.02.
 

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
I've used Power Service (white bottle) since I bought the tractor in April.

After my run-ins with ethanol gasoline over the last couple years, I'm more apt to use an additive.

My old (22 years) Stihl FS-86 trimmer was killed by ethanol. After tearing carb down, used Seafoam. Ran for a month, then quit. Bought a new FS-130 4-cycle trimmer to replace it.

Tore old FS-86 apart again, and started using Startron. The ol' fart has a heavy brush blade on it now, and it runs damn good. I like it better than the new one.

While the ethanol p***ed me off - at least it didn't get my 046 Magnum...yet. Startron and Stabil go in all gas now.

Its one thing for a $400 trimmer - a $1,100 chainsaw is a different story. I use the same theory for a $15,000 tractor. As someone said; it's the fuel, not the machine its in.

Ok - I'm better now.

Just my $0.02.
I understand what your pointing out with the power tools. For many many years, my chain saws, snow blower,weed wackers, leaf blower, push mower, house generator, all never give trouble. I have a two step program that's working for me. I use Stabil all year long, and all power tools get run for five minutes every three months like religion. But, with the tractor being a big buck purchase I wanted to make sure I do the right thing with the fuel. I sure picked a tough topic to ask for advice....lol.... Seems the jury is split so far 50/50....lol....
 

hodge

Well-known member
Lifetime Member

Equipment
John Deere 790 John Deere 310 backhoe Bobcat 743
Nov 19, 2010
2,903
450
83
Love, VA
What does your owner's manual state? Do that. No split jury, and you adhere to the warranty by doing what it says.
 

Bluegill

New member

Equipment
L3750DT Shuttle, L3800DT FEL both
Jan 11, 2012
1,560
4
0
Success Missouri
I've used Power Service (white bottle) since I bought the tractor in April.

After my run-ins with ethanol gasoline over the last couple years, I'm more apt to use an additive.

My old (22 years) Stihl FS-86 trimmer was killed by ethanol. After tearing carb down, used Seafoam. Ran for a month, then quit. Bought a new FS-130 4-cycle trimmer to replace it.

Tore old FS-86 apart again, and started using Startron. The ol' fart has a heavy brush blade on it now, and it runs damn good. I like it better than the new one.

While the ethanol p***ed me off - at least it didn't get my 046 Magnum...yet. Startron and Stabil go in all gas now.

Its one thing for a $400 trimmer - a $1,100 chainsaw is a different story. I use the same theory for a $15,000 tractor. As someone said; it's the fuel, not the machine its in.

Ok - I'm better now.

Just my $0.02.
I just run non-ethanol gas in am 2smoke mix.

Have at least $3000 in chainsaws here. :cool:
 

Jim-Iowa

New member
Oct 14, 2011
19
0
0
Newton,Iowa
Like several others i am a believer in using Power Service in winter or anytime i think the tractor is pushing enough black to indicate dirty injectors.
It is arguable as to whether it is needed due to cold weather and gelling.
Todays fuels are to be blended for cold weather.
Here is the hitch, the fuel is blended at the depot when the tanker is loaded based on current temperature. That may be fine if the temps do not take a 20-30 degree change?
I use the additive to be sure and since I will only use a few bottles per year consider it cheap insurance.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,159
5,262
113
Chenango County, NY
I just run non-ethanol gas in am 2smoke mix.

Have at least $3000 in chainsaws here. :cool:
Wish I could!

I have the 2 Stihl trimmers, 046 chainsaw, and the little guy MS-211 that I just bought used last year.

We live in a very rural area. I can't get non-ethanol gas 'round these parts reasonable. A station 45 minutes away did advertise 93 octane that was ethanol-free, but they've since changed hands. I'm stuck with high test with ethanol.

I have a B.S. in Forestry from SUNY College of Environmental Science and Forestry (ESF) in Syracuse. Never was employed as a Forester, but cut ALOT of wood in my day. My chainsaw is my favorite tool....Many years ago I cut spruce pulp with a Stihl 056 Super. Wrong saw for the job, but I was young.
 

tonyvkubota

New member

Equipment
2013/B3200HST/L504 loader/60" rotary finish mower/ 60"brush hog
Dec 14, 2013
72
0
0
ny
What does your owner's manual state? Do that. No split jury, and you adhere to the warranty by doing what it says.
I can`t argue with what you point out about the owners manual and adhering to the warranty. And personally I believe that myself. With the large mix opinions I believe their is some old school beliefs on the subject due to older tractors. Thanks for taking the time for the advice. New to the forum, and I see its going be a great place for info and fun reading.
 

SLIMSHADIE

Member

Equipment
Kubota BX25D
Apr 10, 2013
445
1
16
Eureka,IL
The best advice is get your fuel where they sell alot of diesel fuel. They are in business for a reason, reliability. Keep it fresh as possible. As stated earlier, todays fuel is blended for today temps, winter being the concern. Algae is a concern, if a preventative treatment is used once in the spring then also in the fall, any problems would be eliminated. Todays engines are ment to run on todays fuel standards. Where I get my fuel, they add a summer additive and also a winter additive already, which they post. They sell alot to businesses and the last thing they want is a customer sitting along side the road. I am they
 

Bluegill

New member

Equipment
L3750DT Shuttle, L3800DT FEL both
Jan 11, 2012
1,560
4
0
Success Missouri
Wish I could!

I have the 2 Stihl trimmers, 046 chainsaw, and the little guy MS-211 that I just bought used last year.

We live in a very rural area. I can't get non-ethanol gas 'round these parts reasonable. A station 45 minutes away did advertise 93 octane that was ethanol-free, but they've since changed hands. I'm stuck with high test with ethanol.

I have a B.S. in Forestry from SUNY College of Environmental Science and Forestry (ESF) in Syracuse. Never was employed as a Forester, but cut ALOT of wood in my day. My chainsaw is my favorite tool....Many years ago I cut spruce pulp with a Stihl 056 Super. Wrong saw for the job, but I was young.
I used to think there was no eth-free here either. Very rural here to. Then got to diggin and found several places that have it but do not advertise it. Closest place it 30 minutes and I get 15 gallons every 4-5 months. Worth the trouble to me!

Yep, 056 is a little overkill for pulp! :D

My favorite saw is a 346xp, but I'm getting older and like the lil hot rod saws...