FRONT AXLE oil super udt2?

[danmorea]

b7100 ,have same extra super udt2 -not sure if is good/better/worst or not good for front differential oil that i have to change soon

 

[kuboman]

Nothing wrong with it but if you want the most durable oil use a synthetic gear oil for the absolute best.

 

[hodge]

My B7100 had UDT in the front axle from the factory- that's good enough for me. I put the same back when I serviced it- the old was almost as clean and clear as the new.
While I agree that a synthetic gear oil is good, I don't think it is necessary- UDT more than does the job. If you have it left over, I say use it instead of buying something else.

 

[tthorkil]

I am editing this post because I did not make it clear that I made this post only to clarify that Super UDT2 is synthetic.
Kubota Super UDT2 Synthetic Universal Trans-Hydraulic Fluid
• Gravity, degree API: 34.5
• Viscosity @ -40 C, cP: 16000
• Viscosity @ 100 C, cSt: 8.1
• Viscosity @ 40 C, cSt: 37
• Viscosity Index: 199
• Pour Point, C max: -42
• Zinc, % wt.: 0.1122
http://www.colemanequip.com/parts/KubotaParts/70000-40201/?gclid=CM2qxOaD5bwCFa9FMgodlyAAJg

 

[Bluegill]

UDT, SUDT2, 80/90 gear. All good, use what ya like...

 

[danmorea]

Than i will use it, what i like is that flow easy in the funnel when is cold .