2 broken Orings with orange paint on half of each and a black piece that’s about 1 inch with small cubes and it’s cut on back like it fits on something round. Does anyone have any idea where these came from? Everything works fine.
Found under my BX23S this AM
- Thread starter yorkies77
- Start date
Russell King
Well-known member
Lifetime Member
Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
No idea on the black plastic part.
The o-rings are from the rams on the front end loader. They are intended to protect the seal on the cylinder during the painting process. It is fine if they have fallen off.
The o-rings are from the rams on the front end loader. They are intended to protect the seal on the cylinder during the painting process. It is fine if they have fallen off.
Thank you very much. I couldn’t figure out why orings would have paint on them.
My wife found all three parts and just told me that the black one was in front of the garage door so possibly not from the tractor.
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Maybe the black plastic piece could be a 'fill-in-the-hole-for-an optional-switch' on something ?
I've never seen anything like it on my BX23S in 6 years.
I have managed to lose the rubber knob off the left loader locking release lever somehow.....
I've never seen anything like it on my BX23S in 6 years.
I have managed to lose the rubber knob off the left loader locking release lever somehow.....