I'm in the process of changing over my LA680 loader to skid steer quick attach. I had thought about cutting off the brackets of these forks and welding on the SSQA plate. Another member suggested selling these forks and just buy some already set up for SSQA.
These forks are made by WR Long and are the pin-on style.
Model FAL42
42" tines
Frame width- 48"
1500# capacity
My loader is a LA680 but according to another website that sells pin-on attachments, these forks should pin onto 11 other Kubota loaders that have the same pin configuration;
LA401
LA402
LA452
LA480
LA481
LA482
LA680
LA681
LA682
LB402
LB552
LB702
They were bought several years ago but have only been used a few times. The paint is faded a little and a 5/8" hole has been drilled in one end of a fork to install a clevis but other than that, they're in great condition.
The SSQA version sells for $900 from dealers and the pin-on version for more than that. I prefer pick up but can ship by freight carrier on a pallet if needed.
$500 if you pick up or if shipped, add freight costs.
These forks are made by WR Long and are the pin-on style.
Model FAL42
42" tines
Frame width- 48"
1500# capacity
My loader is a LA680 but according to another website that sells pin-on attachments, these forks should pin onto 11 other Kubota loaders that have the same pin configuration;
LA401
LA402
LA452
LA480
LA481
LA482
LA680
LA681
LA682
LB402
LB552
LB702
They were bought several years ago but have only been used a few times. The paint is faded a little and a 5/8" hole has been drilled in one end of a fork to install a clevis but other than that, they're in great condition.
The SSQA version sells for $900 from dealers and the pin-on version for more than that. I prefer pick up but can ship by freight carrier on a pallet if needed.
$500 if you pick up or if shipped, add freight costs.
