fel controls help

[sherman]

hi again, well i found out im going to have to replace my control due to unavalible parts to fix. so im going to be going to northern tool to buy one but dont know what im buying as in pressure needed open flow or closed.
any and all advise will be apprecated.

tractor is a l 235 dt 25 horse

old controls are 2 lever

 

[North Idaho Wolfman]

Do you want to upgrade to a single handle or stay with the 2 handle?

8GPM to 12GPM is about right

Open center is what you need, you do not need PB if you only have 2 lines (one in and one out).

 

[Orange man]

I have a new joystick valve for sale in classifieds. pm with any questions

 

[Diydave]

hi again, well i found out im going to have to replace my control due to unavalible parts to fix. so im going to be going to northern tool to buy one but dont know what im buying as in pressure needed open flow or closed.
any and all advise will be apprecated.

tractor is a l 235 dt 25 horse

old controls are 2 lever

Before you go to northern, go to surpluscenter.com's site. Most of the time they are way cheaper on these parts. You will need to know the flow in GPM, and the pressure in PSI that your system operates at, regardless of where you order parts...