We replaced the ECU on our track loader with a used one, because original one stopped working. After that we started getting error code E9126... The manual does not list it, the dealer said it might have to do with "an injector". We registered all injectors into the new ECU but the error persists. Any ideas???
Error code E9126 on SVL65-2
- Thread starter LVig
- Start date
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
An E:9126 code is a problem with the CCV internal pressure detection switch. They can be "NO" or"NC" (Normally Open or Normally Closed) depending on the engine serial number. The ECU that you installed is probably programmed incorrectly for your machine.
Machine serial# 16743 to 32379 is NC and machine serial# 32380 and above is NO.
Tell your dealer to look at TIB-2024-003-R1, SVL CCV Pressure Switch Lodgic. All you need is a simple software reprogramming.
Machine serial# 16743 to 32379 is NC and machine serial# 32380 and above is NO.
Tell your dealer to look at TIB-2024-003-R1, SVL CCV Pressure Switch Lodgic. All you need is a simple software reprogramming.
