Engine won't shut off and dash gauges don't worm

[Ratvon]

Had to jump my kubota and when I turned the key off it wouldn't shut of and I noticed the gauges and 4 ways didn't work so I pushed the rod on the solenoid to shut it down, checked the fuses they were good can anyone point where to go next?
Thanks

 

[Utopia Texas]

It would be a great help if you tell the group what Kubota you have. There are many models out there that go back to the 1970's and they are all set up different.

 

[North Idaho Wolfman]

Second the, need to know the model!

 

[twomany]

Had to jump my kubota and when I turned the key off it wouldn't shut of and I noticed the gauges and 4 ways didn't work so I pushed the rod on the solenoid to shut it down, checked the fuses they were good can anyone point where to go next?
Thanks

Regardless of make or model:

Two things pop up.

Needed to jump start
No electricity for light, gauges or shut off. I assume none for anything.....

Could be the battery is dead or a connection is bad, Battery terminals seem to self insulate just sitting sometimes.

Check you battery and everything associated with it.

 

[Ratvon]

Thanks I'll forget the model will post that later didn't really think it would matter right now all I can say is it's early 90s35 to 40hp diesel I keep wanting to sa 1280