Engine oil???

MGB

New member

Equipment
L2250DT/Ferguson TO30
Jul 3, 2010
14
0
1
SC
Hey guys. The manual for my 1986 L2250 indicates using API CC or CD engine oil. Both of those designations are obsolete now. What is the correct modern day API oil classification that replaced the old CC and CD and what are some of the engine oils you guys use?? Thanks
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,745
2,551
113
Bedford - VA
Hey guys. The manual for my 1986 L2250 indicates using API CC or CD engine oil. Both of those designations are obsolete now. What is the correct modern day API oil classification that replaced the old CC and CD and what are some of the engine oils you guys use?? Thanks
MMm......
a damn near 30 year old tractor.....that still runs well........

I'd hop on down to the local wally world, grab a container of Shell rotella T6 and pour it in......

it ought to run another 30 !:D:)
 

MGB

New member

Equipment
L2250DT/Ferguson TO30
Jul 3, 2010
14
0
1
SC
Thanks Hokie. Yep, still runs real good but it's a baby compared to my '51 Ferguson.
 

Dr Honda

New member

Equipment
BX1870
Mar 30, 2015
174
0
0
Pitt, PA
MMm......
a damn near 30 year old tractor.....that still runs well........

I'd hop on down to the local wally world, grab a container of Shell rotella T6 and pour it in......

it ought to run another 30 !:D:)
Yep... what he said.
 

pendoreille

Member
Lifetime Member

Equipment
B2620, fel, RB1560, Piranha Tooth Bar
Jan 2, 2015
476
13
18
Newport, WA
I have a 1 yo, Did the 50 hour with Kubota 15/40 and at 200 hrs I changed to Rottela T6 and noticed on very cold start up it was quieter and no hesitation on oil light going out. T6 T6 T6
 

lugbolt

Well-known member

Equipment
ZG127S-54
Oct 15, 2015
5,205
1,889
113
Mid, South, USA
T6 is what, $30/gallon? I think that's what it is, or was last time I bought some (November 2015) when I did the oil change in my truck. $140 with tax for an oil change. Normally I use Kubota 15w40 in it, and it runs perfect with it all year long. Winter time sometimes I'll try T6 just because I want to, I can't tell any difference as far as mileage, power, noise, or anything else for that matter....other than my wallet doesn't like it. Anyway I had a little T6 left over and did an oil and filter on my G1900, using T6. Always used Kubota 15w40, so this is the first time for T6. Absolutely no difference whatsoever.

First time I tried T6 in the truck (old 7.3L IH/Ford), I thought right away that the engine was smoother and a little quieter when cold. This past November after changing the oil again from 15w40 to 5w40, I listened closely...and no difference whatsoever. That engine has HUEI injectors so if there was any difference I should have noticed, as the HUEI system is really sensitive to engine oil quality. I always know when it's time to change oil....so maybe my brain and ears were playing tricks on me, trying to justify spending the extra $40 or so for the engine oil.

So between those two examples, my own experience, I say T6 is a waste of money unless you can get it on sale for the same price as Rotella T or Kubota 15w40.
 

rut3556

Member

Equipment
L2250, TG1860
Oct 23, 2015
115
18
18
NH, USA
>>a damn near 30 year old tractor.....that still runs well........<<

Well, I have an '85 L2250 I bought new in that year, and it runs as good as it did on day one. Of course, it has less than 500 hours on the clock and has led a good life. :p

I've been running Amsoil synthetic 15-40 "diesel/marine" in it since break-in, and I suspect the inside of the engine still looks new. :)
 

Mike9

Active member

Equipment
Kubota B6200
Oct 9, 2015
391
31
28
Ghent, NY
Yup - my B6200 is a late 80's model and I run Rotella T 15/40 and it starts and runs fine. I do have a block heater, but haven't needed it this winter.