Drawbar B2710

greeno

greeno

Member

Equipment
B2710 w/LA402 FEL, BL4690 hoe, RB1560, GS1560, Haban 5' sickle bar, 5' JD RC
Jul 14, 2018
187
2
18
Big Lake MN
I'm missing the drawbar for my B2710. I can make one for much less than I can buy a salvaged one and have it shipped to me.

Anyone willing to help me with a project and take measurements from their draw bar?

Also, does Kubota offer a "where used" search function? I have the drawbar p/n, and i assume it works on multiple models, but can figure out how to search that way.

6C040-67110 original
6C040-67113 new
 
R

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,317
1,383
113
Austin, Texas
There is a way on the Kubota site to enter a part number and see where it is used

From memory...which is bad

Go to your tractor and get to the part
Then off to the left side top is a bar type pull down to change search method from model to part number
Then you may need to type in the number and get a list of models or catalogs where it shows up

If you can’t get it done let me know and I’ll look at it and write down better directions


Sent from my iPad using Tapatalk
 
greeno

greeno

Member

Equipment
B2710 w/LA402 FEL, BL4690 hoe, RB1560, GS1560, Haban 5' sickle bar, 5' JD RC
Jul 14, 2018
187
2
18
Big Lake MN
I couldn't find anything on the Kubota site but Messicks gives you a cross reference list when you search by P/N.

Looks like any B tractor drawbar will work. Anyone care to measure their B drawbar?
 
greeno

greeno

Member

Equipment
B2710 w/LA402 FEL, BL4690 hoe, RB1560, GS1560, Haban 5' sickle bar, 5' JD RC
Jul 14, 2018
187
2
18
Big Lake MN
Much obliged 2Huskies; cutting a new one right now.


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.

Top Bottom