shiraz627
Member
Equipment
BX23S Piranha toothbar, Underarmor, PFL1242 pallet forks, BXpanded thumb, ripper
Differences Between BX and L. Personal Experience.
- Thread starter Series9
- Start date
degoniaorange82
New member
Equipment
l2501hst, 5ft. tiller, box blade and finnish mower, subsoiler and plow
NoJacketRequired
Active member
Equipment
B7510 & LA302 FEL & B2782 blower, B7510 & B2781 blower, B2410 & B2550 blower
Interesting thread drift to loader control position...
B2410 has the loader control up front but has a short actuating joystick.
B7510 has the loader control up front but has a long actuating joystick.
B7510 to which I'm adding a cab gave me the option to choose since I was also adding a loader valve. After much himming and hawing I mounted the valve on the right fender. Can't believe how easily it falls to hand, and how it doesn't interfere with the cab. I can actually see the front wheels in this tractor while the other B7510 with its Curtis cab renders the front wheels completely invisible.
B2410 has the loader control up front but has a short actuating joystick.
B7510 has the loader control up front but has a long actuating joystick.
B7510 to which I'm adding a cab gave me the option to choose since I was also adding a loader valve. After much himming and hawing I mounted the valve on the right fender. Can't believe how easily it falls to hand, and how it doesn't interfere with the cab. I can actually see the front wheels in this tractor while the other B7510 with its Curtis cab renders the front wheels completely invisible.
armylifer
Well-known member
Lifetime Member
Equipment
BX1860, FEL, RCK54P MMM, BB1548 Box Scraper, Quick Hitch, Piranha Bar, BX6315
I just saw this thread and I cannot believe what happened here. For the want of a little common sense, a new member that may have been able to contribute some useful information to this forum, has been run off. Taking the OP's original thread and turning it into a discussion about the position of the loader joystick is just plain rude and obnoxious. Good job folks!
armylifer
Well-known member
Lifetime Member
Equipment
BX1860, FEL, RCK54P MMM, BB1548 Box Scraper, Quick Hitch, Piranha Bar, BX6315
To the OP (Series9), I hope that you will give this forum another chance to prove that it is worthwhile to stay. With the equipment that you have, it is highly probable that you will have much to contribute in the future.