Hello. After overheating my B8200 a few weeks ago it began blowing white smoke so I embarked on a partial re-build (against my better judgement). Fortunately, my head wasn't cracked so I had it re-built and I have ordered all that I need to put it back together. However, I have no idea of the torque specs/sequence for the head or the rods. Can anyone here direct me to a source for that information? Also, any other tips come to mind as I go? I'm new to the site and appreciate the info I've gleaned thus far. Thanks.
D950 torque specs
- Thread starter Oldnatchez
- Start date
76_Bronco
Member
Equipment
B7200 4WD w/FEL, 4' disc, 4' Brush Hog, 14" Plow, 4' Blade, JD 246 2 row Planter
Go here > http://www.kubotabooks.com/AutoIndex/index.php?dir=Engines/ and click on "Kubota engine specs.pdf" and save a copy for a full list with larger font
Attachments
76_Bronco
Member
Equipment
B7200 4WD w/FEL, 4' disc, 4' Brush Hog, 14" Plow, 4' Blade, JD 246 2 row Planter
Download this link and scroll to page 12> http://www.kubotabooks.com/AutoInde...s/&file=B5100_B7100__service_manual_part1.pdf
This service manual is for the b7100 with the D750 engine but the torque sequence is generalized for 2 and 3 cylinder engines.