D1402 Bandmill Project

[AWK1964]

Looking for some Ideas / Help. We are going to put a D1402 engine our bandmill, replacing the gas engine that is on it. Trying to find a bolt on method for adding a drive pully to the engine. Would like to find a stub shaft like this that would bolt to the flywheel. But after lots of google search, not having any luck. Anyone have any ideas?

 

[mikester]

Local machine shop will help you make an adapter

 

[Russell King]

Look at the front of the engine, There may be a shaft on the front. You may not want to use it.

 

[cthomas]

Got any Amish around you? The local Amish machine shop runs everything off of a V2203 Kubota engine. They just replaced it after 14 years of running 10 hours a day, six days a week. Has a clutch lever to engage the drive belt. They also supply the other Amish families with a like setup to power whatever they need.
Something like this from https://bunkerhillengine.com/parts/clutches/

 

[PoTreeBoy]

Got any Amish around you? The local Amish machine shop runs everything off of a V2203 Kubota engine. They just replaced it after 14 years of running 10 hours a day, six days a week. Has a clutch lever to engage the drive belt. They also supply the other Amish families with a like setup to power whatever they need.
Something like this from https://bunkerhillengine.com/parts/clutches/
View attachment 113072

I think the clutch is a good idea. Also, having an outboard bearing will reduce the side load on the engine bearing. I'm assuming OP is planning a belt drive.
I googled 'engine pto' and found WPT Power. I'm sure there are many other companies. Maybe some can help.

 

[AWK1964]

I think the clutch is a good idea. Also, having an outboard bearing will reduce the side load on the engine bearing. I'm assuming OP is planning a belt drive.
I googled 'engine pto' and found WPT Power. I'm sure there are many other companies. Maybe some can help.

Awesome thank you for that. That would be perfect!!

 

[AWK1964]

Got any Amish around you? The local Amish machine shop runs everything off of a V2203 Kubota engine. They just replaced it after 14 years of running 10 hours a day, six days a week. Has a clutch lever to engage the drive belt. They also supply the other Amish families with a like setup to power whatever they need.
Something like this from https://bunkerhillengine.com/parts/clutches/
View attachment 113072

Thank you . That would solve all the issues.

 

[barts]

This may also prove useful: https://www.hayescouplings.com/products/sae-stub-shafts/

 

[AWK1964]

This may also prove useful: https://www.hayescouplings.com/products/sae-stub-shafts/

I got with a local machine shop. He is in the process of making one of these. Ill post some pictures once i get.