Classic Chevy parts source?

Daylight

Well-known member

Equipment
BX231, Ortolan T10
Feb 25, 2021
366
520
93
6860
Could somebody here point me to a good source for classic Chevy parts? I'm slowly resurrecting my '79 Monte Carlo (parked for the past 29 years), but so far it's been impossible to find a PCV valve for the Buick 231 CID V6 in it.

Other parts haven't always been easy, but we managed.

On topic: once running again, the car will reside next to the BX... :cool:

TIA for any pointers!
 

Oleracer

Well-known member

Equipment
B2150 Kubota LA 350 750 Woods S250 Bobcat 300x deere
Jul 18, 2024
222
258
63
CT
Could somebody here point me to a good source for classic Chevy parts? I'm slowly resurrecting my '79 Monte Carlo (parked for the past 29 years), but so far it's been impossible to find a PCV valve for the Buick 231 CID V6 in it.

Other parts haven't always been easy, but we managed.

On topic: once running again, the car will reside next to the BX... :cool:

TIA for any pointers!
If I remember correctly that pcv valve is the same for v8 and V6 . Has plastic 90 on it that always cracked. Shouldn’t be too hard to find. They used them in a bunch of years.
Try Standard PCV Valve V180
Only 6-7 bucks
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,295
4,872
113
North East CT
  • Like
Reactions: 1 user

bbxlr8

Well-known member

Equipment
L2501 w/R14s, LA525, BH77, SGC0660, CL 5' BB, CL PHD, WG24 + Ford 1210 60" mmm,
Mar 29, 2021
391
251
63
Eastern PA
You need to have a part number. Have you tried RockAuto dot com? I find that they have a lot of parts for the older cars.
UPDATE:
Found it for $0.49 on Rock Auto

I'm a big user of rockauto for many vehicles - also don't forget your friendly local NAPA
 

KKBL

Active member

Equipment
L2501 HST QA 525 loader, 42" forks, brush hog, grader/box/back blades
Jan 5, 2022
101
109
43
Girard, PA
I'm getting old. Classic Chevys used to be the tri-five, 55-56-57.
 

Daylight

Well-known member

Equipment
BX231, Ortolan T10
Feb 25, 2021
366
520
93
6860
Thank you, everyone! Next up is a Ported Vacuum Switch, which seems a lot harder to find. For an engine of which millions were made, I expected better parts availability... Ah, the joys of fixing old cars!
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,295
4,872
113
North East CT
The only way to get a ported vacuum switch is to know the original part number and search for that particular part. They were made for a lot of different configurations of engines and accessories. Then you will need to find a correct socket to remove and replace it.
Lets start off with how many nipples on the one you have, and what is the configuration of the nipples? Why do you have to replace it? If it broke and you have the original nipple that broke off you can super glue it back on.