I'd like you to design a chainsaw holder for my stihl MS271 20" bar for my L4060. Tell me where to send the check. I like the one you made for your bx25. Anyone know how to contact him?
Chain saw carriers
- Thread starter BigRed57
- Start date
Re: Paul short...Mr Wildfire..id like to ask a favor....
He is @SpecialtyR on twitter or www.specialtyrepairs.ca
Sent from my SM-G920P using Tapatalk
He is @SpecialtyR on twitter or www.specialtyrepairs.ca
Sent from my SM-G920P using Tapatalk
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Re: Paul short...Mr Wildfire..id like to ask a favor....
Sadly Wildfire (Paul short) has not been posting anything on here for quite some time, he's just too busy.
His website has no contact info, and he has no personal PM's available on here either.
Sadly Wildfire (Paul short) has not been posting anything on here for quite some time, he's just too busy.
His website has no contact info, and he has no personal PM's available on here either.
Last edited:
TripleR
Active member
Equipment
BX2200, BX2660, L5740 HSTC, M8540HDC and some other tractors and equipment
Re: Paul short...Mr Wildfire..id like to ask a favor....
Paul said he no longer follows OTT or TBN and doesn't wish his email given out as it exceeded 300 messages. Paul is a really nice guy, he is just covered up and pretty much stays that way.
Paul said he no longer follows OTT or TBN and doesn't wish his email given out as it exceeded 300 messages. Paul is a really nice guy, he is just covered up and pretty much stays that way.
Re: Paul short...Mr Wildfire..id like to ask a favor....
send him a message through youtube....
https://www.youtube.com/user/7863348/about
send him a message through youtube....
https://www.youtube.com/user/7863348/about
Re: Paul short...Mr Wildfire..id like to ask a favor....
I've been thinking about a mount for my 'bota and found this one online http://coupersproducts.com/kubota-l3200-l3400-l3800-l3900-kolpin-chain-saw-boot-mount/
Any pictures of said mount?
I've been thinking about a mount for my 'bota and found this one online http://coupersproducts.com/kubota-l3200-l3400-l3800-l3900-kolpin-chain-saw-boot-mount/
Re: Paul short...Mr Wildfire..id like to ask a favor....
https://www.youtube.com/watch?v=VcIHRhKjNu8
This is the video where he introduces it I believe. Either way, contact through you tube is easiest. Great guy. I have talked with him a bit. Leave a comment and he normally responds quite quickly. Good luck
https://www.youtube.com/watch?v=VcIHRhKjNu8
This is the video where he introduces it I believe. Either way, contact through you tube is easiest. Great guy. I have talked with him a bit. Leave a comment and he normally responds quite quickly. Good luck
Re: Paul short...Mr Wildfire..id like to ask a favor....
If you felt brave, buy a nice thick piece and just plunge the chainsaw in and let it do the milling
The metal stand looks like 5/16 plate with a 90* on the bottom for bolting to the machine, and then a 60-75* cut. I believe that angle cut is for visibility over your right leg.
That holder is made from thicker cutting board plastic from an industrial plastic shop. If I was to make that, I'd buy the 2 halves, trace the blade out on 1 side of the plastic only, and mill it out with a wood router. Tapping the holes would be the easy part.
If you felt brave, buy a nice thick piece and just plunge the chainsaw in and let it do the milling
The metal stand looks like 5/16 plate with a 90* on the bottom for bolting to the machine, and then a 60-75* cut. I believe that angle cut is for visibility over your right leg.
Re: Paul short...Mr Wildfire..id like to ask a favor....
You could make that out of Teflon or Delron. Hard plastics. I would have liked to spoke with him about it. Oh well..I've always got myself to count on...lets see what we can whip up.
You could make that out of Teflon or Delron. Hard plastics. I would have liked to spoke with him about it. Oh well..I've always got myself to count on...lets see what we can whip up.
Re: Paul short...Mr Wildfire..id like to ask a favor....
Delrin. Nylon wouldn't be an issue either. I swear there's a market for something. I've been all over the internet, and will someday be making my own.....
Sent from my XT1254 using Tapatalk
Delrin. Nylon wouldn't be an issue either. I swear there's a market for something. I've been all over the internet, and will someday be making my own.....
Sent from my XT1254 using Tapatalk
TripleR
Active member
Equipment
BX2200, BX2660, L5740 HSTC, M8540HDC and some other tractors and equipment
Re: Paul short...Mr Wildfire..id like to ask a favor....
Would something like this work: http://www.cabelas.com/product/auto...ensions/_/N-1118217/Ns-CATEGORY_SEQ_104519880
Would something like this work: http://www.cabelas.com/product/auto...ensions/_/N-1118217/Ns-CATEGORY_SEQ_104519880
Re: Paul short...Mr Wildfire..id like to ask a favor....
IMO, I would want support for the majority of the bar.
coachgeo
Well-known member
Equipment
L225 w/woods Few Mowers & Back Blade, D722 in Motorcycle (Triumph Tiger), LMTV
Re: Paul short...Mr Wildfire..id like to ask a favor....
With that holder's support being at the base end would think it would be fine even if not being deeper.
That being said... there is an opposit approach.... a Chainsaw Box - strap it on the hood orr??
http://www.ebay.com/bhp/chainsaw-carry-case
https://www.google.com/search?q=cha...X&ved=0ahUKEwiC6eaV-7nOAhVRGsAKHe5nCzIQsAQIUQ
With that holder's support being at the base end would think it would be fine even if not being deeper.
That being said... there is an opposit approach.... a Chainsaw Box - strap it on the hood orr??
http://www.ebay.com/bhp/chainsaw-carry-case
https://www.google.com/search?q=cha...X&ved=0ahUKEwiC6eaV-7nOAhVRGsAKHe5nCzIQsAQIUQ
Last edited:
Re: Paul short...Mr Wildfire..id like to ask a favor....
I used a similar bracket from Cabela's to mount mine to the rops. Used pressure treated plywood for a scabbard. Works great.
I used a similar bracket from Cabela's to mount mine to the rops. Used pressure treated plywood for a scabbard. Works great.
Re: Paul short...Mr Wildfire..id like to ask a favor....
Here is another option from Kolpin for ATVs.
https://www.kolpin.com/powersports/saw-boot
Here is another option from Kolpin for ATVs.
https://www.kolpin.com/powersports/saw-boot
RonBoyBX25D
Member
Lifetime Member
Equipment
B2650, LP Grapple, Bro-Tek spacers, QH, Box Blade, Landscape Rake, RB, and 1560G
Re: Paul short...Mr Wildfire..id like to ask a favor....
I mounted that on my ROPS with U-bolts works great just watch out for catching the bar on a tree or post. Not sure how I know that issue.
I've got a near idea using a piece of 2x4 rectangular tubing. I'll post some pics when I'm done with it ***128077;***127995;. I'll probably have to mount it on my loader arm on the right side. Need to find a way to keep it from dumping out when using the loader.