Cat 1 rcr 1872 ?

[Jms63]

Well I just figured out when I picked my hog up today it was cat 1 pins and my mx6000 is cat2 I had some sleeves come in my box on tractor but they are short and will not take the space up between the attachment sides, going to have find a longer sleeve or get another one this size I am pretty sure I can get 2 in there to solve the issue.

 

[UpNorthMI]

For attachments that I am only going to use with my MX5800 I will swap out the pins to Cat 2, then you don't have to be searching or dealing with spacers over the years. Many attachments have both Cat 1 and Cat 2 connections and use stepped pins, love those. I still have several sets of sleeves and always keep a set in the tool box on the back of the tractor.

 

[jyoutz]

For attachments that I am only going to use with my MX5800 I will swap out the pins to Cat 2, then you don't have to be searching or dealing with spacers over the years. Many attachments have both Cat 1 and Cat 2 connections and use stepped pins, love those. I still have several sets of sleeves and always keep a set in the tool box on the back of the tractor.

The pins are cheap at tractor supply.