Canopy?

Tusculum

New member

Equipment
2019 BX 2380 with 60" mower and front loader
Jul 5, 2020
2
0
1
Greeneville Tn
Man this East Tn sun is baking my half bald noggin! Anyone point me to a canopy company that wont break the bank? TIA, Jack
 

Gadget

New member

Equipment
B2650, LP FDR1672 Finish Mower, Box Scraper, LP QH05
Jun 8, 2018
14
1
3
Hodgenville, Kentucky
I installed a RhinoHide canopy on my B2650 a couple weeks ago........I would buy again. Very well built canopy.
 

Palmettokat

Active member

Equipment
M6800, B2710, L6060, Volvo 5 ton excavator and implements.
Apr 21, 2020
251
53
28
South Carolina
If you can make the frame get a piece of aluminum, diamond tread looks good. It will reflect a good bit of the sun heat also. Just protect yourseif from the edge of the metal, it is thin enough to cut your hear or such if you hit it. Did this for our Gator and had a friend who had a heavier duty than for siding brake to bend the lips we needed.
 

D2Cat

Well-known member
Lifetime Member

Equipment
L305DT, B7100HST, TG1860, TG1860D, L4240
Mar 27, 2014
13,884
5,687
113
40 miles south of Kansas City
If you make one out of thin metal I have some of the edge trim in a large roll. Can cut a piece long enough to around the entire canopy. It looks similar to this, and will keep you head scar free!!
1595472979313.png
 

UpNorthMI

Well-known member
Lifetime Member

Equipment
L3200, L3901, MX5800, SVL75-2, KX040
May 12, 2020
850
568
93
Up North, MI
I'm dying in the sun, I just ordered my first canopy last week as it was on sale and the email Ad reached me at just the right moment, I hope to enjoy a little shade over the next month or two! I'll post review when it arrives this week. Hope it will survive in the woodland too as well as the open spaces.

 
Last edited:

michigander

Active member

Equipment
B2601
May 29, 2018
547
234
43
Northern Michigan
I got this on the tractor. The hardware package/ instructions is a disappointment on supplied parts for roof attachment. 6 sets of bolt/nuts/rubber fender washers/ metal fender washers are supplied. Directions show 10 needed anther set in box shows 8 needed. I figured out I was short 5:50 pm hardware closes at 6:00 pm . I made it to store in time. Back home with top on tractor the top is drilled for 6 sets. When done I'm required to drill 2 holes no problem these 2 will depend on roof placement forward or backwards.

The thing is heavy/awkward taking on and off for a short guy like me.
Canopy on B2601.jpg
 
  • Like
Reactions: 1 user