Can some one with a 2017 BX23S confirm the front bucket inner dimension

[Mr Winichester]

Hi all I have a BX 23 S on order, and I wanted to get an exact measurement conformation of the interior of the front bucket so I can build or order a tooth bar. I am getting the two lever quick attach bucket.

Thank you for your help.

 

[jmf78]

I am getting 46 3/8" but it's a pin on bucket. Not sure that helps but...there it is.

Sent from my SM-N920V using Tapatalk

 

[Mr Winichester]

Thanks JMF.

I dont know if the pin on i different from the new two lever quick attach.

So I would like to get some measurements of the two lever quick attack type.

 

[jmf78]

Not sure if this helps but the brochure states that they are the same width. Just trying to get you some information. Loader specs and brochure are attached. Hopefully a member with the QA Loader can get you a measurement soon.

http://cloud.tapatalk.com/s/59b14051ce8ab/BX80-ENG_1.pdf

Sent from my SM-N920V using Tapatalk

 

[Mr Winichester]

Thank you, JMF

 

[imnukensc]

My bucket on my 2380 with pin on bucket measures at 46.5" inside width. If my research is correct, I believe this is what the Piranha bar for the BX series is made at. (Haven't gotten the Piranha bar yet, but is on my wish list.)

 

[Mr Winichester]

Thanks, imnukensc

Just wanted to confirm with some actual owners of the new bucket style, maybe some out there?

 

[Mr Winichester]

Ok so no 2017 BX 23S owners out there reading this forum????

 

[RonBoyBX25D]

Hope to have one within the week, I was told it is the same width as the 70mseries BX.

 

[Mr Winichester]

Thanks Ron, maybe you can ,shoot me a measurment at some point.

 

[RonBoyBX25D]

Will do, can't wait to pick it up.

 

[drb1215]

I ordered a Piranha toothbrush for my BX23S with a QA bucket. Before I did I asked them if the BX23S size option would work. They assured me it would. It did, and works great.

-Dan

 

[Redbusdriver]

I have a BX23S with the 2 handle skid steer quick attach FEL bucket. I just measured the inside of the bucket at the front lower point the Piranha add on bar would mount to.

I came up with 46 1/4 inches.

I have no idea if all the buckets are standard size or if there are any manufacturing variances in play. The BXpanded ordering page asks for exact measurements which leads me to believe there may be variances.

Good luck & have fun with your new BX!

 

[perryphenalia]

Just became new owner of BX23S last week. Found this form and saw your post. So I signed up to reply with some measurements and a pic for you. It looks like 46 3/8" inside dimension.

Would like to get a tooth bar for landscaping around the house. Would be very interested in your research and/or manufacturing discoveries. Hope you follow up with a photo and some stories.

Sent from my iPad using Tapatalk

 

[Mr Winichester]

Thanks for those replies guys, let you know how it works out.

 

[RonBoyBX25D]

Finally picked up the tractor, 46 3/8***8221; is also what I have. Used the same PTB from my Bx25D. Hope it works for you.