Anyone make camshaft plugs for a L175 with a Z750 engine. I hear this is a common cause of low oil pressure. I need to check my oil pressure. I assume it is low because the oil pressure switch was broken off. My guess it was done so it could be sold.
I cut open the old oil filter and poured the old oil on a magnet. No metal particles. I also poured the oil through some fine cloth, no bearing bits.
I have been told the camshaft plugs are plastic and come out of the camshaft causing low oil pressure.
I cut open the old oil filter and poured the old oil on a magnet. No metal particles. I also poured the oil through some fine cloth, no bearing bits.
I have been told the camshaft plugs are plastic and come out of the camshaft causing low oil pressure.
