Does anyone have a B2601 with a Bx2816 on it? whats the performance? Do I need the brush guard B tilt #B3412 for the snowblower and loader? the instructions weren't very clear. I cant seem to find any pictures of the K connect attached to the tractor if someone could take a few pics id appreciate it.
BX2816 on a B2601
- Thread starter Spdfreak91
- Start date
I got it all together the only thing I cant figure out is how the manual chute crank hand gets attached to the tractor. Anyone have a picture ?
There is an L bracket that bolts to the tractor and the handle goes through a hole in the bracket. Most people throw them in the trash and opt for the hydraulic turning system. I built my own on my BX22 using a hydraulic motor. That was about 20 years ago before Kubota offered anything other than the hand crank.
Yeah i have the handle mount, it says to replace carriage bolts and mount but the B2601 doesn't have carriage bolts the deck has a stud which seems welded to it.
im thinking of getting the woodmaxx unit and making it work.
www.woodmaxx.com
im thinking of getting the woodmaxx unit and making it work.
Hydraulic Chute Rotator Kit - WoodMaxx
Kit requires one rear remote installed on tractor. DISCLAIMER: Woodmaxx snow blower kits are designed and engineered for a direct fit to Woodmaxx snow
www.woodmaxx.com
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
so...... the gear on the motor WILL mesh with the chute gear ??
the hydraulic pressure/volume are the same ???
the hydraulic pressure/volume are the same ???
thats what i'm trying to get to the bottom of, certainly looks like it, but before i spend 375 im looking for input or someone to sell it to if it doesn't work
Have you considered the electric option(s)? Either power the worm screw or use a cable wrap setup.
yeah electric seems hit and miss, the factory kit is $500 I could fabricate is myself for less but i feel for the money id rather have hydraulic
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
One 'cheat', is to download the 'parts list' of the unit, often the hydraulic motor will be listed as the make/model from the mfr, or you google the 'part number' to find a cross reference to it.
You could use any $40 'ATV winch' to do the 'lasso the chute' method . Probably the cheapest,cleanest ,easiest way to do it.
You could use any $40 'ATV winch' to do the 'lasso the chute' method . Probably the cheapest,cleanest ,easiest way to do it.
im thinking of two hoses made locally , this and the spur and housing from the dealer.
1.93 cu in Dynamic BMM32UBU Hydraulic Motor | Low Speed High Torque Hydraulic Motors | Hydraulic Motors | Hydraulics | www.surpluscenter.com
1.93 cu in Dynamic BMM32UBU Hydraulic Motor, Low Speed High Torque Hydraulic Motors, 1.93 cu in Dynamic BMM-32-U-B-U HYDRAULIC MOTOR Brand new,Dynamic,BMM-32-U-B-U ,
www.surpluscenter.com