BX2680 Mower Lift Linkage came disconnected on both left/right sides at the pivot point between front and rear arms, right side pivots enough I can reconnect them, left side not enough movement to allow reconnect even after backing the rear limit bolt all the way out.
- How would you reconnect the left side?
- How to prevent happening again? Are side loads on the linkage causing the issue?
The two small ears on the pivot pin don't seem very robust to maintain the connection.
- How would you reconnect the left side?
- How to prevent happening again? Are side loads on the linkage causing the issue?
The two small ears on the pivot pin don't seem very robust to maintain the connection.