Anyone know how long it'd take to replace the brake parts in a BX23S,once backhoe and ROPS are off ?
I've posted diagram to clarify.....
I've posted diagram to clarify.....
Last edited:
BX23S brake replacement
- Thread starter GreensvilleJay
- Start date
What’s the connection between the clutch and the brakes? Can’t help but I’m curious.
edit: I thought it was nuts for a moment! Then I saw you must’ve edited out the unintended word “clutch“ and replaced it with the word brakes….
edit: I thought it was nuts for a moment! Then I saw you must’ve edited out the unintended word “clutch“ and replaced it with the word brakes….
Last edited:
sorry, the brake is really a set of 'friction discs' that when you press on the brake peddle, they 'squish together' to stop rotation of a shaft connected to the differential. When lever 010 is pulled forward, 060 plates get pressed and 'brakes' are applied.The case shown , is the right side of the 'differential', right axle goes through under 010...
I figure it's worn out, already adjusted rod as short as possible. 1625 hours on machine in 8 years.
That BX is getting some use. Mine is 9 years old and only has 700 hours and I thought I used it a lot.
I'm curious about the brake replacement job.... even though I never adjusted mine.... still seems fine although I don't use it much.
Bought it when I turned 65,decided I need another tractor ( had 6 at the time...). Have put maybe 14 hours using it on my property but my neighbours LOVE it ! Turns compost(100yds,2X a season), 'tames' brush on 10 acres(was 8 when I started), snow removal, lots of trenches and swayles, stump removal, hauling 'this and that' , 'here and there,. bucking logs, grading lots and driveways, moving 200t of boulders,you know.. the usual things you do.....
On my 3rd set of fronts, 2nd rears as have to drive on paved road.
On my 3rd set of fronts, 2nd rears as have to drive on paved road.
whitetiger
Moderator
Staff member
Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Hay WT can you explain the chart ? I can't see it taking 5+ HOURS to remove the snap ring and replace the 'stay'. Same goes with 6+ hours to replace the 'plates'. Now I can see some time to go find the 3 balls that rolled off the bench and went 'walkabout' ! But, can you ballpark the time to replace the 'guts' once the 'right side of housing' is off ? I'm getting a rediculous estimate for the job.Thanks.