BX2380

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,775
2,583
113
Bedford - VA
where is drip located???
 

85Hokie

Moderator
Staff member
Lifetime Member

Equipment
BX-25D ,PTB. Under Armor, '90&'92-B7100HST's, '06 BX1850 FEL
Jul 13, 2013
10,775
2,583
113
Bedford - VA
on the tractor!
sound like one of students....................

ok - I'll bite .................. WHERE SPECIFICALLLLLLY on said tractor is it dripping from?

a coupling? a gasket? a filter??

they say a picture is worth a 1000 words.......... and they were correct!!!!!!
 

Littlebit

New member

Equipment
BX2380
Jun 13, 2022
2
0
1
Pleasureville, KY 40601
Hydraulic oil drip but oil levels are full and was wondering if anyone has had this. It’s only got 76 hours on it
Not sure. I didn’t notice it until I moved the tractor. It wasn’t very much. About three spot about the size of a quarter but it does smell like hydraulic fluid. The loader isn’t on it. I can’t see anything anywhere.
 

Dieseldonato

Well-known member

Equipment
B7510 hydro, yanmar ym146, cub cadet 1450, 582,782
Mar 15, 2022
728
439
63
Pa
Not to sound tacky, but crawl u Der it and look up. Or look where the drip is next time before you move it.
 

ve9aa

Well-known member

Equipment
TG1860, BX2380 -backblade, bx2830 snowblower, fel, weight box,pallet forks,etc
Apr 11, 2021
1,202
982
113
NB, Canada
the drip is on the floor - - - duh !

J/K... ;-D
 
  • Haha
Reactions: 1 user

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,835
1,548
113
WestTn/NoMs
Ok, we've had our fun. Welcome aboard. Put paper or cardboard under it. Then look straight up from the drip spots. A couple of areas to look at: the lines to the oil cooler - apparently it's too much trouble for the assembly guy to tighten the hose clamps. And hydraulic fittings, especially around the quick couplings.

Good luck.
 
  • Like
Reactions: 1 user

ve9aa

Well-known member

Equipment
TG1860, BX2380 -backblade, bx2830 snowblower, fel, weight box,pallet forks,etc
Apr 11, 2021
1,202
982
113
NB, Canada
My 2380 leaked the first time I mowed the 2ac of lawn in 4WD.....I figured out the front axle "vent/fill" bolt was slightly loose and then when things got hot, it peed out from there onto the garage floor.

This hasn't happened to me, but it's VERY common for your 4-port quick connect hydraulics for your loader to leak out those flat face couplers, then dribble down onto the floor.

HTH
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,330
4,906
113
North East CT
It was a Corvair that was parked there. They leaked oil the day after the oil was put into the engine. It was the way that GM provided rust-proofing of the engine's lower shrouding.