BX2380- Starts up, but stalls

fmgsr

Member
Dec 19, 2018
50
4
8
PA
Something new, My BX2380, I bought new, now only 225 hrs. Starts beautiful, warms up fine and Smooth, then when I press the forward or reverse, it stalls. Or when. Sitting there, i hit the mower pto, stalls, as if I’m mowing and get off the tractor seat.
Now recently, the seat cover cracked from the cold. I just bought a new cover, didn’t get it on yet. But I tried getting off the seat, and unlatching it, and then banging it in place. Nothing. I unplugged the seat switch wire and replaced it. Nothing.
Yesterday, after playing with it after an hour, it started moving beautifully. Well, today stalling again.
Any thoughts.
Im getting ready to trade up a bit larger.
 

Attachments

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
32,059
7,786
113
Sandpoint, ID
Bad seat switch, some models have mutiple seat switches.
 
  • Like
Reactions: 1 users

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
12,589
5,427
113
Greensville,Ontario,Canada
sure, there's a great wiring diagram in the electrical section, think it's post #13. Nice, hirez, zoooomable.

what RPM are you running when this happens ?
how old it the fuel ?

does it always die 2 seconds later, or random ?
 

fmgsr

Member
Dec 19, 2018
50
4
8
PA
It starts and runs very smoothly. Gas is new, with treatment, and idles nice. As soon
as I press forward or reverse, it dies. Like I said, seat cover has cracked from the cold. I didn’t put the new cover on yet.
 

Workerbee

Active member

Equipment
Zd21
Mar 1, 2020
246
130
43
MN
It starts and runs very smoothly. Gas is new, with treatment, and idles nice. As soon
as I press forward or reverse, it dies. Like I said, seat cover has cracked from the cold. I didn’t put the new cover on yet.
gas?
 

Workerbee

Active member

Equipment
Zd21
Mar 1, 2020
246
130
43
MN
Id suspect the reason it dies when trying to move it, is either your parking brake is on, or the micro switch that it engages thinks it is.
 

fmgsr

Member
Dec 19, 2018
50
4
8
PA
It runs beautiful. Until I press forward or reverse. Plus it dies if at idle I engage mower PTO.

Two days ago, It also did this, but after running it at idle and trying to move, it did. Then ran like a champ.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
32,059
7,786
113
Sandpoint, ID
Id suspect the reason it dies when trying to move it, is either your parking brake is on, or the micro switch that it engages thinks it is.
The parking brake being on on any Kubota tractor will not make it die electrically, there is no interconnect to that.
Most do not have any electrical connect or switches on the parking brake linkage.
 
  • Like
Reactions: 1 user

fmgsr

Member
Dec 19, 2018
50
4
8
PA
I have two wires going into the base of the seat.
BX2380
Somewhere inside that seat is the safety switch.
 

MOOTS

Well-known member
Lifetime Member

Equipment
MX6000
Jun 27, 2019
2,050
2,473
113
Canton, Georgia
Don’t trade it in. Sell it to me as is for pennies on the dollar. And get it down to Georgia.

Seems like you’re on the right track with the seat switch. Maybe as simple as a wire came off the switch.
 

fmgsr

Member
Dec 19, 2018
50
4
8
PA
Don’t trade it in. Sell it to me as is for pennies on the dollar. And get it down to Georgia.

Seems like you’re on the right track with the seat switch. Maybe as simple as a wire came off the switch.
“pennies on the dollar” get a price to me. Don’t be funny.
 

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,560
6,039
113
Chenango County, NY
Last edited:
  • Like
Reactions: 1 user

RCW

Well-known member
Lifetime Member

Equipment
BX2360, FEL, MMM, BX2750D snowblower. 1953 Minneapolis Moline ZAU
Apr 28, 2013
9,560
6,039
113
Chenango County, NY
What are you asking for it? Not that it really matters, we are too far apart to make anything work.
Hmmmm…. I might not be a long distance….🧐

I’d prefer a B series but sometimes you need to pick the low hanging fruit 🍎
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
12,589
5,427
113
Greensville,Ontario,Canada
FWIW
to bypass you probably remove from eat switch, add a jumper between the connector contacts.
Sitting on seat, close switch contacts ,supplies power to the OPC module, according to the hirez diagram in post #13, electrical subforum.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
32,059
7,786
113
Sandpoint, ID
Well, you offered pennies on the dollars,
Throw me a decent respectable number.
I'll give you $50 you deliver... It's the last house on the end of the road!
Bring a pizza too and I'll throw in another $20, it's impossible to get deliveries out here.
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
12,589
5,427
113
Greensville,Ontario,Canada
Pay me $50 and deliver it for free, after all it doesn't 'start and run'...... and I'd have to spend 5 minutes to fix it. :rolleyes: