BX2360 won't go forward or reverse

[chief36chevy]

After installing a third function valve on my BX2360 my tractor would not go forward or reverse. My FEL and 3 Point hitch both work fine. I have not installed the fork attachment as I cannot move it.

Before the install everything worked fine.

 

[chief36chevy]

Ok I need to apologize in my previous message I said that I installed a third function valve. Well to install it I took up the floorboard. While wrangling it out of the cab I bumped the low high range lever out of gear thus no forward or reverse. My bad.
Thanks

 

[kubotasam]

We have all been there at one time or another.

 

[Snoopybr549]

After installing a third function valve on my BX2360 my tractor would not go forward or reverse. My FEL and 3 Point hitch both work fine. I have not installed the fork attachment as I cannot move it.

Before the install everything worked fine.

Hey I am wanting to get a kit for mine. What kit did you get ?

 

[BX23S-1]

Kubota sam said it best already. Yup, sure thing, we`ve ALL made a few mistakes. But what the best thing is here, you came back and said what the problem really ended up being. Good on you sir chief36chevy. I wish more people would own their mistakes, no matter how embarrassing the mistakes were.

 

[shelkol]

Some days I only make one mistake, I get out of bed LOL

 

[chief36chevy]

Hey I am wanting to get a kit for mine. What kit did you get ?

I got mine off eBay $549.95. Summit-Hydraulics Third Function Valve Kubota BX1860, BX1870, BX2360, BX2370, BX2660, BX2670 & 80. It was a bit of a struggle with the hoses but other than that it seems like a good piece.
The seller is good to work with. He does answer messages.

 

[Snoopybr549]

I got mine off eBay $549.95. Summit-Hydraulics Third Function Valve Kubota BX1860, BX1870, BX2360, BX2370, BX2660, BX2670 & 80. It was a bit of a struggle with the hoses but other than that it seems like a good piece.
The seller is good to work with. He does answer messages.

Hey thanks for the reply. I just bought that kit should be here Tuesday. What problems should I Expect with hoses ?

 

[GreensvilleJay]

re: While wrangling it out of the cab I bumped the low high range lever out of gear thus no forward or reverse

BTDT... I found out my forklift has high-neu-low range ! Bodged 'lever' by my left heel. Alway been 'down' and in high... explains WHY I couldn't go up 'hills' easily. It's now in LOW, forever... slow but torky !!