Bx2230 lights

[Tink]

the lights on my bx2230 are on All the time. Can I turn them off, or do I need to remove the bulbs, or ???

 

[BigG]

What if you pull the fuse to the headlights? What else is on the same circuit?

And the silly question what harm are they doing being turned on?

 

[imnukensc]

Turn'em off with the switch. If that doesn't work then the switch may have a short and you can either take it apart and try to do a refurb on it or replace it.

 

[Tink]

What if you pull the fuse to the headlights? What else is on the same circuit?

And the silly question what harm are they doing being turned on?

 

[Tink]

Are they a Kubota safety issue that they need to be on including the taillights or if they should be off unless switched on, then I have a switch issue! If a switch issue I will either work on the switches or pull the fuses.
i just like to work without drawing attention from noisy neighbors! Thanks

 

[Tink]

Turn'em off with the switch. If that doesn't work then the switch may have a short and you can either take it apart and try to do a refurb on it or replace it.

 

[Tink]

If not a lights on safety issue than I’ll pull the fuse or work on the switches. Thanks

 

[Tink]

To all that responded, thanks, the problem is the switches are NOT weather resisterant. A shot of wd40 into the side hole made the switches work.