Bx2200 steering cylinder reseal help needed

billback

Member

Equipment
bx 2200
Dec 9, 2011
33
0
6
mt pleasant ,pa
I have to reseal my steering cylinder, because i can not buy a new cylinder, i have the cylinder off, how do you disassemble it ? I see no end caps?thanks for any help you can give
 

ipz2222

Active member

Equipment
L235, bx2670
May 30, 2009
1,927
32
38
chickamauga ga usa
I couldn't get mine apart either, took it to a Kubota dealer and they had trouble also, but were able to get it apart. If you have a place that works on hydraulic cylinders, they may be able to do it.
 

whitetiger

Moderator
Staff member

Equipment
Kubota tech..BX2370, RCK60, B7100HST, RTV900 w plow, Ford 1100 FWA
Nov 20, 2011
2,942
1,399
113
Kansas City, KS
There are wire snap ring on each end inside of the barrel. Take a piece of pipe and drive end glands into the barrel, remove wire rings and drive glands out using a punch inside of the threaded hole in the shaft.
 

billback

Member

Equipment
bx 2200
Dec 9, 2011
33
0
6
mt pleasant ,pa
thanks for your help, i got the snap ring out by drilling a small hole through the cylinder end , and i got the end gland out ,now how do you remove the end cap ?