BX Grill Guard measurements to build a similar one,

[lamanated]

I have a doz feet of 2" flat bar, and want to build a guard like the one the optional BX for my 2360, so I can add a winch attachment plate to it, so was wondering the dimensions of one if someone would mind measuring one out thanks

 

[bxray]

It is 16" wide and 11" wide at the bottom.
First bend at 4.5" second bend at 3.5".
Total hight 20".

 

[lamanated]

thanks weekend project start at least

 

[bxray]

Since you are making it from scratch you may want to make it so you can remove it with a couple of pins to get the hood off.
Have the grill slide into pipes, slots or somthing.

You will be glad the next oil change.

Ray

Ps send photos!

 

[bxray]

Here is a grill with good brush guard you may want to add to your design.

http://www.orangetractortalks.com/forums/showthread.php?t=12965&page=8

Ray

 

[jay2]

It is 16" wide and 11" wide at the bottom.
First bend at 4.5" second bend at 3.5".
Total hight 20".

Where did you get that guard? Can I add a trailer hitch to it?

Thanks'
jay