BX 2380 Wheel Spacers and 54" MMM

[Trimley]

I put these on mine, with R14 tires

 

[Bri-Guy-GA]

These are hub centric any issues with that

I put these on mine, with R14 tires

I see these are hub centric was that an issue? Would that work work on my 1880.

 

[Henro]

These are hub centric any issues with that

I see these are hub centric was that an issue? Would that work work on my 1880.

I don’t think BX rear wheels are hubcentric. Both my BX 2200 and my son-in-law’s BX 23S are not hub centric, but are lug centric.

In my case, I see the advantage of wheel spacers that you purchased being hub centric, is that if you want to, you could double them up and increase the thickness. I doubt I would do that if they were not hub centric.

 

[Bearcatrp]

These are hub centric any issues with that

I see these are hub centric was that an issue? Would that work work on my 1880.

From what I have read, us 1880 owners are limited to 2 1/2 inch spacers or the mower will rub on the tires.

 

[Trimley]

These are hub centric any issues with that

I see these are hub centric was that an issue? Would that work work on my 1880.

They bolted right up with a thin-wall socket. I've no idea if they'll fit others the same.

 

[85Hokie]

They bolted right up with a thin-wall socket. I've no idea if they'll fit others the same.

That thin walled socket is the key!