Hi All,
I have a BX2370 (2013). About two years ago, when started, the tach would hang around 200 or so RPM for several minutes and there was a squeal similar to a slipping V-belt. The issue would clear itself, the noise stopped, and the tach performed normally. Now, all I get is the squeal, and the tach has died just hanging at around 200 RPM. IMHO, the issue is a mechanical cable issue, but I can't find any reference to follow. Seems some tachs are mechanical, some are electronic.
Thanks for any advice in advance.
EJ
I have a BX2370 (2013). About two years ago, when started, the tach would hang around 200 or so RPM for several minutes and there was a squeal similar to a slipping V-belt. The issue would clear itself, the noise stopped, and the tach performed normally. Now, all I get is the squeal, and the tach has died just hanging at around 200 RPM. IMHO, the issue is a mechanical cable issue, but I can't find any reference to follow. Seems some tachs are mechanical, some are electronic.
Thanks for any advice in advance.
EJ
