Brush Hog with BX1850

[MW3Designs]

I have some brush clearing to do, and was wondering if the BX1850 could handle a 4' brush hog?

 

[SDT]

I have some brush clearing to do, and was wondering if the BX1850 could handle a 4' brush hog?

Yes, if not too heavy and cover is not too tough.

 

[Roadworthy]

Your tractor should be able to handle the four foot brush hog but take it easy. Keep an eye on the temperature as you will be working it pretty hard. Remember too you'll be adding a lot of weight to the rear of the tractor which will affect handling.

 

[Roadworthy]

Your tractor should be able to handle the four foot brush hog but take it easy. Keep an eye on the temperature as you will be working it pretty hard. Remember too you'll be adding a lot of weight to the rear of the tractor which will affect handling.

 

[Dieseldonato]

Yep it will be fine. Near max as far as hp goes. My cousin routinely bush hoggs with a 4' mower and an 18hp massy hydro. It's in low range the entire time but mows fine. Think it's a claimed 15 pto hp. My 7510 handles a 6' without much issue.

 

[MW3Designs]

I was worried that it might be underpowered, put I think I’m going to give it a shot.