Broken Head Bolts
- Thread starter tdnp
- Start date
Kubota Newbie
Active member
Equipment
M4500, New Idea Cut-Ditioner, JD 14T Baler, IH "Plow Chief" plows, Oliver Rake
Stud or bolt? If a bolt NAPA can probably match from the markings on the head. If a stud, you'd be better off getting from a dealer since there's no way to tell the grade and if it is or isn't a "stretch" type alloy.
How did you break?
How did you break?
Measure and PHOTOGRAPH the bolt/s and studs. ie- 12-1.50X118mm
Email these folks with info and pics (for head type) and see if they can help.
These, like most things are common, you just need to know where to look.
http://headbolts.com/
Email these folks with info and pics (for head type) and see if they can help.
These, like most things are common, you just need to know where to look.
http://headbolts.com/
Last edited:
Give beverage tractor in Virginia a call. They keep a set of manuals for some Grey Market machines and have been a huge help with my L1500DT. http://beveragetractor.com/
The manuals are written in Japanese, but the part numbers are good, so the IPL's are still helpful and they will fax you pages if need be. Many of the parts are in stock or can be ordered, as they are common across a series. Remember, just because your tractor is a grey market doesn't mean its parts have to be.
The manuals are written in Japanese, but the part numbers are good, so the IPL's are still helpful and they will fax you pages if need be. Many of the parts are in stock or can be ordered, as they are common across a series. Remember, just because your tractor is a grey market doesn't mean its parts have to be.