When working on tractor is it harmful to start and stop the engine without warming up? For instance if you want to raise the front end using the FEL or moving tractor to a different position. Before I work it I always warm it up.
Starting the tractor in cold weather to be able to use the FEL to lift the front end and then shutting it off after you lifted it is not going to break your tractor. I'm assuming you only do this occasionally.When working on tractor is it harmful to start and stop the engine without warming up? For instance if you want to raise the front end using the FEL or moving tractor to a different position. Before I work it I always warm it up.
It's all ready hit here and I just plowed 10 inches of fresh snow.Thanks for your input guys. There are times that I have to move it but have no "job" to do so was wondering if starting it and stopping in a short period of time was detrimental. I would not do this consistently, have religiously followed the start and warm up procedure since day one before I put a load on it or work it. I do have a block heater, really does make a difference, especially below zero. Another cold front dropping down from the north, they are saying as much as 40 degrees colder than today, so I am fueled up and ready to enjoy the heated cab when the snow hits.
We didn't get that much, yet, only a few inches. Cab was nice since we were single digits all day.It's all ready hit here and I just plowed 10 inches of fresh snow.
My brother who operates his equipment like you are considering, but perhaps with more start stops, finds his new battery too run down to start the engine after a while.When working on tractor is it harmful to start and stop the engine without warming up? For instance if you want to raise the front end using the FEL or moving tractor to a different position. Before I work it I always warm it up.