Blades for RCK60CA finishing mower.

[jjanmaat]

Hi folks.

I've got a 60" finishing mower I use with a BX 1860. The mower is an RCR60CA. It is a 21 3/4 inch blade, part number 70080-91059. I've attached photos.

The local Kubota dealer can order the blades, for a total cost of about $500 Canadian dollars. Lots of way cheaper blades online. However, they don't have quite the same mounting hole, and are an inch shorter.

Anyone have experience with an alternative?

Thanks,

John.

 

[Bee-Positive]

The oval holes for those blades just don't look right, but I've been wrong lot of times in the past.
Call Messicks to see if these are correct.

 

[jjanmaat]

The oval holes for those blades just don't look right, but I've been wrong lot of times in the past.
Call Messicks to see if these are correct.

The oval hole fits onto the oval receiving end of the mount (see attached). The hole is 1 1/4 inch along the widest dimension, so a round opening might work. May need to do something to get the friction between the washer and the blade.

 

[North Idaho Wolfman]

EBAY just click on the link it will work.

Pardon Our Interruption...

AMAZON

Amazon.com: Buhler Farm King K-60 Set of 3 Blades 966719 : Patio, Lawn & Garden

Amazon.com: Buhler Farm King K-60 Set of 3 Blades 966719 : Patio, Lawn & Garden

www.amazon.com

 

[North Idaho Wolfman]

The oval holes for those blades just don't look right, but I've been wrong lot of times in the past.
Call Messicks to see if these are correct.

That is a RCR60-CA Deck
It is not a USA deck CA ONLY and is not an RCR60 deck.
Messicks can not help him.