BH92 Backhoe Stabilizer Arm Droop

John E. Law

New member

Equipment
L4802
Sep 14, 2024
10
6
3
Bristol, NY
I have noticed that the right side stabilizer arm for the BH92 backhoe drops down to the ground overnight after use. Is this normal or is this telling me there is a leak somewhere?
image.jpg
 

GreensvilleJay

Well-known member

Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
Apr 2, 2019
11,419
4,908
113
Greensville,Ontario,Canada
Not normal, kinda nice to have an automatic parking brake though;)
#1 cause.... probably the ram seal(s) is shot
#2 cause.... spool valve sticking 'down' ??
 

Henro

Well-known member

Equipment
B2910, BX2200, KX41-2V mini Ex., Beer fridge
May 24, 2019
5,781
2,965
113
North of Pittsburgh PA
#3 possibility…. Control valve for that stabilizer has greater than average leakage through it. Wonder if you could swap hoses between the two control valves and see what happens?
 

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
8,756
4,492
113
Myersville, MD
windyridgefarm.us
I have noticed that the right side stabilizer arm for the BH92 backhoe drops down to the ground overnight after use. Is this normal or is this telling me there is a leak somewhere?
View attachment 137689
Obviously a leak somewhere - the question is where. I am inclined to think the cylinder since the other one stays up.

Easy to test. After you park it put a strap on the stabilizer to keep it up and disconnect the rod end hose and cap/plug the port on the cylinder. Then take the strap off and check if in the morning. If it does not stay up the cylinder is leaking.

Dan
 

beckmurph

Well-known member

Equipment
Kubota LX2610TLB/Woods finish mower/woods rotary cutter/
Aug 23, 2012
307
259
63
catlettsburg, ky
Well, I have the same droopy stabilizer leg on my Bh77.
Valve stack was replaced under warranty.
Couple weeks later stabilizer started drooping in about 10 minutes.
Bad problem is that it wont support the tractor very long when digging.
I have to keep adjusting that stabilizer when digging.
 

TheOldHokie

Well-known member
Lifetime Member

Equipment
L3901/LA525, B7200DT/B1630, G2160/RCK60, G2460/RCK60
Apr 6, 2021
8,756
4,492
113
Myersville, MD
windyridgefarm.us
Well, I have the same droopy stabilizer leg on my Bh77.
Valve stack was replaced under warranty.
Couple weeks later stabilizer started drooping in about 10 minutes.
Bad problem is that it wont support the tractor very long when digging.
I have to keep adjusting that stabilizer when digging.
If it leaks down when extended the problem is almost surely the valve

Dan