BH 76 vs BH77

Tarmy

Well-known member
Lifetime Member

Equipment
L2800, BH76A, FEL,box scraper
Nov 17, 2009
482
408
63
Lake Almanor, Ca
I have a BH76 subframe and am going to buy a new BH77...does anybody know if they will both fit on the same subframe on an L2800?

Anybody got any feedback on the BH77 , like it...problems, etc.

I am trying to figure out if my old bucket will work (pin diameter) on the 77...if anyone can measure the dia. on their 77...would appreciate it.

Thanks...
 

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,042
3,722
113
Wind Gap, PA
I measure the bucket pin diameter at right around an inch. The top BH mounting pins (to subframe) are 1-1/4".

Perhaps you can check the parts diagrams for both models to see if the subframes/buckets are the same. I do think that a bucket swap would work.

I have very limited use on the BH77 when I got it in december. it had the wrong control sticks and it appeared to swing slow to the left.
 

Sammy3700

Active member

Equipment
L3800HST,524Loader,BH77,Landplane,Disk,Mowers and more
Feb 20, 2012
437
41
28
Red Springs, NC
The BH77 has the newer style curved boom. So far I like mine it does have the thumb option. As far as sub frame they are the same part numbers. Sub frame will fit all basic L series and bh75-bh77 also fit the same sub frames. I searched all this because I bought one off a L3800HST and put it on a L3700SU. Have now bought a NOS sub frame and hose kit from a dealer that stated it fit a L3400 with a LA463 loader and BH76. It fit on Dad's L3800HST exact and now we both can use the backhoe.
 
  • Like
Reactions: 1 user

smittyjp

New member

Equipment
B1750
May 24, 2016
1
0
1
new hamburg
The BH77 has the newer style curved boom. So far I like mine it does have the thumb option. As far as sub frame they are the same part numbers. Sub frame will fit all basic L series and bh75-bh77 also fit the same sub frames. I searched all this because I bought one off a L3800HST and put it on a L3700SU. Have now bought a NOS sub frame and hose kit from a dealer that stated it fit a L3400 with a LA463 loader and BH76. It fit on Dad's L3800HST exact and now we both can use the backhoe.
Thanks for the info, so in your opinion would a bh76 fit onto a bh77 subframe, i have a b2650 which calls for a bh77, but I can purchase a nice used bh76 with thumb and would just buy the new bh77 subframe if that would work
 

Sammy3700

Active member

Equipment
L3800HST,524Loader,BH77,Landplane,Disk,Mowers and more
Feb 20, 2012
437
41
28
Red Springs, NC
Thanks for the info, so in your opinion would a bh76 fit onto a bh77 subframe, i have a b2650 which calls for a bh77, but I can purchase a nice used bh76 with thumb and would just buy the new bh77 subframe if that would work
That should work