best degreaser for small parts

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,881
2,297
113
central ct
I often find myself painting small parts in the basement for various projects. The latest is automating my ssqa. I had to paint a small alum bracket to support the electrical connector.
I normally use spray contact cleaner. It does a very good job at removing just about everything but it is an expensive way to degrease. . .
Does anyone use a bucket with basket? If so what degreaser do you use in it?
 
  • Like
  • Dislike
Reactions: 1 users

Roadworthy

Well-known member
Lifetime Member

Equipment
L2501 HST
Aug 17, 2019
1,649
526
113
Benton City, WA
Degreaser used to come with the basket in a bucket kits purchased at the auto parts store. For smaller stuff you could try acetone. It's sold in the paint department of big box stores and Ace. Caution - it melts many plastics.
 

lynnmor

Well-known member

Equipment
B2601-1
May 3, 2021
1,445
1,159
113
Red Lion
I use dish soap and hot water, no fumes and relatively safe to use. If more cleaning power is needed, Purple Power will work. If water must be kept away, only then will I use parts cleaning chemicals.
 

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,235
6,401
113
Sandpoint, ID
Purple cleaner for really greasy ,oily or nasty stuff that can get water wet.
Brake parts cleaner, acetone, and denatured alcohol are my other go to methods.
 
  • Like
Reactions: 3 users

The Evil Twin

Well-known member

Equipment
L2501, LA526,
Jul 19, 2022
2,823
2,844
113
Virginia
I almost always use denatured alcohol for metals and ABS or HDPE. Fiberglass or materials sensitive to chemicals I'll use Dawn and water.
 
  • Like
Reactions: 1 user

Tughill Tom

Well-known member

Equipment
B3200
Dec 23, 2013
1,219
1,347
113
Turin, NY
Just a note about Acetone, don't use it if there is any type of open flame anywhere need near you,i.e Pilot light, Furnace. It doesn't take a lot of it to make a BIG Boom and fire.
 

armylifer

Well-known member
Lifetime Member

Equipment
BX1860, FEL, RCK54P MMM, BB1548 Box Scraper, Quick Hitch, Piranha Bar, BX6315
Mar 26, 2013
2,051
784
113
Thurston County, WA
I used to use petroleum based cleaning solvent but these days I just use gasoline or kerosene. When done cleaning parts I pour the used fluid into a used oil container for disposal the next time I get rid of used vehicle fluids such as motor oil or transmission fluid.
 

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
Put it into the dishwasher in a corner where your wife will not notice it. Then make sure that you remove it before she empties the dishwasher. It it is big, do it while she isn't home. Dishwashers make cleaning wire wheel covers an easy task.
 
  • Like
  • Love
Reactions: 1 users

ctfjr

Well-known member
Lifetime Member

Equipment
L3800HST
Dec 7, 2009
1,881
2,297
113
central ct
Thanks for all the replies! I think I'm going to try the Purple Power and the acetone.
My 1st experience with acetone type cleaners wasn't pleasant. I tried cleaning my scooter's windscreen with it. omg! throw that windscreen away.
The company I work for distributes Zep but I couldn't find anything appropriate in stock.
 
  • Dislike
Reactions: 1 user

Flintknapper

Well-known member
Premium Member

Equipment
L2350DT
May 3, 2022
1,768
2,226
113
Deep East Texas
Mineral Spirits is what I use in my parts cleaner. It lasts a long time, does a good job and is much less flammable than certain other products.
 
  • Like
Reactions: 2 users

pigdoc

Active member

Equipment
G1800S L2500
Aug 19, 2022
279
209
43
SE Pennsylvania
Purple Power.
It's cheap, and effective. I buy it in the big jug and then use a discarded throw-away spray bottle to apply it.
First, scrape off what you can with a putty knife or wire brush.
Let the parts soak in it for a few hours (re-apply if necessary), then rinse off. Use hot water, if you can.
It will discolor paint.

ATF is a great solvent, too, especially for heavy grease build-up. So, save the drained ATF when you renew the fluid in your car transmissions to use as cleaner! Follow up the ATF with a detergent if you're going to paint the part.

-Paul
 
  • Like
Reactions: 1 user

DustyRusty

Well-known member

Equipment
2020 BX23S, BX2822 Snowblower, Curtis Deluxe Cab,
Nov 8, 2015
6,237
4,816
113
North East CT
Make sure to use vinyl or latex gloves if you are using any of the purple products. Not only do they remove grease and grime, but they also deplete your skin of essential things such as skin! It is extremely caustic to your hands. Also, don't use it to clean any aluminum items.
 
  • Haha
Reactions: 1 user

Lil Foot

Well-known member
Lifetime Member

Equipment
1979 B7100DT Gear, Nissan Hanix N150-2 Excavator
May 19, 2011
7,521
2,556
113
Peoria, AZ
I buy non chlorinated brake cleaner by the case for my machine shop, and also use Purple Power, Zep, or Castrol Super Clean.
I find the much touted Simple Green to be simply useless.

I watch the garage & estate sales for various cleaners; I have bought lots of brake cleaner, carb cleaner, engine degreaser for cheap, and can usually buy partial cans for a quarter.
 

PoTreeBoy

Well-known member
Lifetime Member

Equipment
L35 Ford 3930
Mar 24, 2020
2,818
1,535
113
WestTn/NoMs
Anybody else use B52?
edit: OP said small parts. You can still get the cleaner in a can with the basket, $40/gal. Wow
 
Last edited:

North Idaho Wolfman

Moderator
Staff member
Lifetime Member

Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Jun 9, 2013
30,235
6,401
113
Sandpoint, ID
Thanks for all the replies! I think I'm going to try the Purple Power and the acetone.
My 1st experience with acetone type cleaners wasn't pleasant. I tried cleaning my scooter's windscreen with it. omg! throw that windscreen away.
The company I work for distributes Zep but I couldn't find anything appropriate in stock.
I use a lot of Zep products, Industrial purple, and Heavy Duty Citrus are both great, don't use Purple on aluminum that you want to stay shiney, as it will dull it!
 

Flintknapper

Well-known member
Premium Member

Equipment
L2350DT
May 3, 2022
1,768
2,226
113
Deep East Texas
Anybody else use B52?
edit: OP said small parts.
Good for things like small engine carbs...etc, where you can let it sit overnight, but items I want to clean and use right away, I'll use Mineral Spirits followed by a quick blast of brake cleaner.