Backhoe grease zerk missing?

leoric

leoric

Member

Equipment
B2650 since 2018. BH77, LA534, Forks, 60" Bucket, 60" Mid mount mower
Mar 13, 2019
76
1
6
Indianapolis
Hey all this should be pretty easy to answer. I have a BH77 for the B2650. I noticed that where the pistons sit that swing the boom left/right there is not a grease zerk on the bottom. Did this get forgotten by the dealer? I attached a couple of pictures. It looks like there are threads in the hole.
 

Attachments

SidecarFlip

SidecarFlip

Banned

Equipment
M9000HDCC3, M9000HD, Kubota GS850 Sidekick
Oct 28, 2018
7,197
554
83
USA
Simple fix, replace it. Alemite fittings are readily available at any auto parts store and TSC. Buy a selection, they are inexpensive.
 
leoric

leoric

Member

Equipment
B2650 since 2018. BH77, LA534, Forks, 60" Bucket, 60" Mid mount mower
Mar 13, 2019
76
1
6
Indianapolis
I guess my question was more "if" there is supposed to be a zerk there. Both of those pivot points (left and right cylinder) are missing the zerk. Looks like I'll be headed to the auto parts store tonight.
 
D

dirtydeed

Well-known member
Lifetime Member

Equipment
B2650 BH77, U27-4R2, BX23TLBM, box blade, rear blade, flail mower, Stump Grinder
Dec 8, 2017
3,018
3,663
113
Wind Gap, PA
No grease fittings go in there. It's just a pin. That cylinder isn't supposed to move at that pin point.

You're good to go. :cool:
 
N

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,230
763
113
Hadashville, Manitoba, Canada
dirtydeed said:
No grease fittings go in there. It's just a pin. That cylinder isn't supposed to move at that pin point.



You're good to go. :cool:
Click to expand...
I'm going to check on mine, curious now. Some zerks are used on "non-moving" parts in that they lube areas that could seize parts together that need disassembly for service, like my snow blower augers to their shaft.

Sent from my Moto G (5) Plus using Tapatalk
 
edritchey

edritchey

Well-known member
Lifetime Member

Equipment
A bunch of cute little Kubotas
Jul 19, 2014
1,106
804
113
Wellsville, PA
The manual that came with my BH92 shows where all the grease points are I would check your manual if that is a place to grease it will be listed in the manual.
 
Last edited:
N

nbryan

Well-known member

Equipment
B2650 BH77 LA534 54" ssqa Forks B2782B BB1560 Woods M5-4 MaxxHaul 50039
Jan 3, 2019
1,230
763
113
Hadashville, Manitoba, Canada
edritchey said:
My manual that came with my BH92 shows where all the grease points are I would check your manual if that is a place to grease it will be listed in the manual.
Click to expand...
Those are not grease points in my manual (BH77), but are threaded holes for zerks. No grease needed, but those pivot pins do move in use, just not much, maybe 10-20 degrees?

Sent from my Moto G (5) Plus using Tapatalk
 
leoric

leoric

Member

Equipment
B2650 since 2018. BH77, LA534, Forks, 60" Bucket, 60" Mid mount mower
Mar 13, 2019
76
1
6
Indianapolis
Nice, thanks for the info. Yeah it seems weird since those pins do move and they are threaded holes. That's what I get for crawling around under my tractor!
 
R

Russell King

Well-known member
Lifetime Member

Equipment
L185F, Modern Ag Competitor 4’ shredder, Rhino tiller, rear dirt scoop
Jun 17, 2012
5,317
1,383
113
Austin, Texas
They may be providing a method to remove the pin? Install zerk, pump grease in, pressure then pushes pin out the other side?

I don’t know for sure why they are there, just a thought.


Sent from my iPad using Tapatalk
 
You must log in or register to reply here.

Top Bottom